GPU water coolers
−13%
only 1 piece on sale
CHF86.– was CHF99.–
Watercool Heatkiller V für RTX 3080/3090 - Nickel + Acetal
Best selling GPU water coolers from Watercool
On this page you'll find a ranking of the best Watercool products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.
1. Watercool Heatkiller V für RTX 3080/3090 - Nickel + Acetal
With the HEATKILLER V, Watercool is launching a new generation of coolers for Nvidia RTX 30 graphics cards. Equipped with unique highlights, the current version of the HEATKILLER V presents what is technically feasible. An increased number of cooling fins increases the cooling capacity directly above the graphics processor and thus improves the most important area. The cooler base, milled from a solid block, ensures contact with all relevant components. The directional dual-layer inflow distributes the water simultaneously on two levels. This ensures an inflow that is at least 30 per cent higher than that of the previous generation. The wide and symmetrical flow paths reduce dead spots (stagnant water) to a minimum and accelerate the flow. The overall result increases not only the maximum cooling capacity but also the flow rate of the HEATKILLER V. Thanks to newly designed spacers made of high-performance plastic (PEEK), the 10 mm solid copper block is ideally insulated from the circuit board. In addition to the technical innovations, the design of the cooler is also impressive. The screwless cover makes the entire block look as if it has been cast from a single mould. The symmetrical channels further emphasise the look of the cooler and make it a unique eye-catcher.
2. Watercool Heatkiller V Ultra RTX 4090 Strix/TUF Acrylic Ni ARGB
High-end GPU water cooler in full-block design, with acrylic lid and black cover, for ASUS RTX 4090 STRIX and TUF graphics cards.
3. Watercool Heatkiller V for RTX 30803090, ARGB - Nickel + Acrylic
The HEATKILLER V from Watercool is a highly advanced water cooler specifically designed for Nvidia RTX 30 graphics cards, including the RTX 3080 and RTX 3090 models. This cooler sets new standards in cooling technology and offers improved cooling performance through an increased number of cooling fins arranged directly above the graphics processor. The massive, machined cooler base made of nickel-plated copper ensures optimal contact with all relevant components, while the innovative dual-layer inlet distributes the water on two levels. This results in a significant increase in cooling and flow performance compared to the previous generation. The design of the HEATKILLER V is not only functional but also aesthetically pleasing, featuring a screwless cover and symmetrically designed channels that give it an elegant appearance. The integrated aRGB strips provide customizable lighting, making the cooler a standout feature in any system.
- Increased cooling performance through improved fin arrangement
- Dual-layer inlet for optimized water distribution
- Massive nickel-plated copper cooler base for best contact
- Innovative flow paths to minimize dead water
- Aesthetic design with screwless cover and aRGB lighting.
4. Watercool HEATKILLER V PRO for RTX 4090 FE - ACETAL Ni
5. Watercool Heatkiller V for RTX 30803090 - Copper + Acetal
With the HEATKILLER V, Watercool launches a new generation of coolers for the current Nvidia RTX 30 graphics cards. Equipped with unique highlights, the latest version of the HEATKILLER V showcases what is technically feasible. An increased number of cooling fins enhances the cooling performance directly above the graphics processor, thereby improving the most critical area. The cooler base, machined from a solid block, establishes contact with all relevant components. The groundbreaking dual-layer inlet distributes the water simultaneously on two levels, resulting in at least a 30 percent higher inflow compared to our previous generation. The wide and symmetrically designed flow paths minimize dead spots (standing water) and accelerate the flow. The overall result not only increases the maximum cooling performance but also the flow rate of the HEATKILLER V. Thanks to newly designed spacers made of high-performance plastic (PEEK), the 10 mm solid copper block is ideally insulated from the circuit board. In addition to the technical innovations, the cooler's design is also impressive. The screwless cover gives the entire block a seamless appearance. The symmetrically designed channels further enhance the aesthetics of the cooler, making it a unique eye-catcher. Technical specifications: Base plate material: electrolytic copper, cover material: acetal, connection terminal material: acetal, dimensions (LxWxH): 230 x 119 x 21 mm, connection: 4x G 1/4 inch (DIN ISO 228-1), weight: pressure tested: 2 bar, compatibility: Nvidia Geforce RTX 3080 / 3090. Package contents: 1x HEATKILLER V, 1x mounting material, Thermal Grizzly Kryonaut thermal paste.
6. Watercool WAK HEATKILLER V for RTX 4080 FE - ACRYL Ni-Bl aRGB
The WAK HEATKILLER V for the NVIDIA GeForce RTX 4080 FE is a highly advanced water cooler specifically designed to meet the demands of modern graphics cards. With a focus on performance and design, this cooler provides effective cooling for the GPU, VRAM, and voltage regulators. The construction features an optimized cooling structure with a variety of fins that ensure high flow rates and efficient heat dissipation. The cooler is made from high-quality materials, including a nickel-plated electrolytic copper base and an acrylic glass cover, which not only maximize cooling performance but also offer an appealing aesthetic. The integration of aRGB lighting allows for personalized customization of the appearance, while the tool-free design and insulating spacers made from high-performance plastic simplify installation. The WAK HEATKILLER V is thus an ideal choice for anyone looking to combine performance and style in their PC build.
- High-performance cooling structure with 48 x 0.3 mm fins for optimal heat dissipation
- Flow-optimized nozzle technology for even coolant distribution
- PEEK spacers for improved insulation and easy assembly
- Integrated connection module for a clean installation
- Compatible with the legendary Kryonaut thermal paste for the best thermal transfer.
7. Watercool Heatkiller V Ultra RTX 4090 Strix/TUF Acrylic Ni-Bl ARGB
High-end GPU water cooler in full-block design, with acrylic lid and black cover, for ASUS RTX 4090 STRIX and TUF graphics cards.
8. Watercool Heatkiller IV for Radeon RX 5700 XT, RGB - Acrylic + Nickel
The Heatkiller IV for Radeon RX 5700 XT by Watercool is a highly advanced water cooler specifically designed for AMD Radeon RX 5700 and XT graphics cards. Featuring a sleek design that includes a transparent acrylic top and a silver aluminum cover, this cooler combines aesthetics with functionality. The RGB LED lighting provides an appealing visual effect, while the powerful cooling technology ensures effective heat dissipation. The cooler is designed to efficiently cool the GPU, memory, and voltage regulators, making it an ideal choice for custom water cooling setups. By utilizing high-quality materials, such as nickel-plated copper for the base plate, the Heatkiller IV offers outstanding cooling performance comparable to that of high-end CPU coolers. This cooler is not only functional but also a stylish upgrade for any gaming system.
- Custom-fit for AMD Radeon RX 5700 / XT graphics cards
- Effective cooling performance through nickel-plated copper base
- Cools GPU, memory, and voltage regulators
- Elegant acrylic glass top for an attractive appearance
- Integrated RGB LED strip with 4-pin connector for motherboards.
9. Watercool Heatkiller V Ultra RTX 4090 FE - Acrylic Ni-Bl ARGB
High-end GPU water cooler in full-block design, with acrylic lid and black cover, for NVIDIA RTX 4090 Founders Edition graphics cards.
10. Watercool Heatkiller V Ultra RTX 4090 FE - Acrylic Nickel ARGB
High-end GPU water cooler in full-block design, with acrylic lid and black cover, for NVIDIA RTX 4090 Founders Edition graphics cards.
