Best Play-Zone products in the Electronics supplies + Casing category

On this page you'll find a ranking of the best Play-Zone products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.

1. Play-Zone Experiment board 3cm x 7cm green

High-quality experimental circuit board / breadboard (no hard paper)
for the fast assembly of circuits

* Size gross: 3cm x 7cm
* Board thickness: 1.6mm
*
24 x 10 = 240 solder points, additional 32 bus points
* grid dimension 2.54mm, dot grid
* Color: Green
 

Play-Zone Experiment board 3cm x 7cm green (Circuit board)
Electronics supplies + Casing
–15%
only 3 of 5 remaining on sale
4.60 CHF was 5.40 CHF

Play-Zone Experiment board 3cm x 7cm green

Circuit board

2. Play-Zone heat sink kit

This is an aluminum heatsink kit used for cooling the chips on Raspberry Pi. Comparing to other heat sink, it has been attached with thermal conductive adhesive tape, allowing the Raspberry Pi to cool more efficiently. Besides, the installation is simple, what you need to do is to remove the heatsink protection and stick it on Raspberry Pi. 

3. Play-Zone Hole grid plug-in board Breadboard Fullsize

A plug-in board, also known as a plug-in board, protoboard or breadboard, is used for the mechanical attachment and electrical connection of electronic components. In contrast to printed circuit boards, the components of plug-in boards are not soldered, but only plugged in. This is particularly advantageous for experimental setups, as the circuit can be changed by simply plugging it in again. Plug-in boards are often used in the hobby sector and sometimes also in schools/training, as the assembly is quick and no soldering knowledge is required.

Size: 165.1mm x 54.6mm x 9.4mm - Version: plug-in board - Bus lines: 4 - Number of pole terminals: 830
 

4. Play-Zone 10 pcs. Circuit board switch 12 x 12 with cap (5 colours à 2 pcs.

Board switch / Push Button 12 x 12 mm with cap ( 5 colours ) -
Perfect for breadboards as e.g. reset switch

In 5 different colours = 2 pcs. each yellow, red, green,
blue, white

Designation
Circuit board switch

Nominal voltage
24 VDC

Rated current
50 mA

Design
push-through installation

Switching mode
Pulse function

Length
12mm

Width
12mm

Height
7mm

Temperature range
-25...+70 C
 

5. Play-Zone 10 pcs. Jumper

10 pcs. Jumper - the quite normal, from the family of the Short-circuit bridges and coding plugs. 2.54 Raster.

6. Play-Zone 10 pcs. Jumper Red

10 pcs. Jumpers - the normal ones, from the family of
Short-circuit jumpers and coding plugs. 2.54 grid.

7. Play-Zone 10 pcs. Jumper White

10 pcs. Jumpers - the normal ones, from the family of
Short-circuit jumpers and coding plugs. 2.54 grid.

8. Play-Zone 120-piece set with spacers 6mm 20mm screws and

Practical set with brass spacers in different lengths
with matching screws and nuts - incl. storage box

Set consists of:

* Ten pcs. Spacer bolt M3 / 6mm / 2
x internal thread
* Ten pcs. Spacer bolt M3 / 10mm / 2 x internal thread
* Ten pcs. Spacer bolt M3 / 15mm / 2 x internal thread
* Ten pcs. Spacer bolt M3 / 20mm / 2 x internal thread
* Ten pcs. Spacer bolt M3 / 6mm / internal and external thread
* Ten pcs. Spacer bolt M3 / 10mm / internal and external thread
* Ten pcs. Distance bolt M3 / 15mm / internal and external thread
* Ten pcs. Spacer bolt M3 / 20mm / internal and external thread
* 20 pcs. M3X6 screws, 6mm
* 20 pcs. M3 nuts
 

9. Play-Zone Hole grid plug-in board breadboard with 26 pcs. jumper cables

BREADBOARD WITH 26PCS. JUMPER CABLE SET

A plug-in board, also known as a plug-in board, protoboard or breadboard, serves
the mechanical fastening and electrical
connection of
electronic components. In contrast to printed circuit boards
boards the components are not soldered, but only plugged in. The
is especially advantageous for experimental setups, since the circuit
can be changed by simply plugging it in again. Plug-in boards are
often in the hobby sector and partly also in schools/education
used, because the assembly is fast and no
soldering skills are required.

Technical data:

Size: 165.1mm x 54.6mm x 9.4mm

Version: plug-in board

Bus lines: 4

Number of pole terminals: 830

26pcs. Jumper cables:
Eighteen pcs. Cable 10cm
four pcs. Cable 15cm
two pcs. Cable 20cm
two pcs. cable 25cm
 

10. Play-Zone Experiment board 5cm x 7cm green

High-quality experimental circuit board / breadboard (no hard paper)
for the fast assembly of circuits

* Size gross: 5cm x 7cm
* Board thickness: 1.6mm
*
24 x 18 = 432 solder points, additional 64 bus points
* grid dimension 2.54mm, dot grid
* Color: Green