Best OEM products in the Electronics supplies + Casing category

On this page you'll find a ranking of the best OEM products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.

1. OEM 140 pcs. Breadboard connection cable with box

Cable set for breadboard connections (wire, no strand)

Ready stripped, in various lengths and colours.

Total 140 Connection cables

2. OEM Solenoid lifting solenoid 5V

Solenoids are a great way to induce linear motion for pushing, pulling
or controlling switches and levers.This smaller solenoid is designed
to work directly with
5V which makes it a great match for embedded
projects. It has a throw of about 4.5mm and 2 M2 mounting holes on the
body.

The wire lead is about 2" long and is terminated with a 2-pin JST PH
connector.

Note: The mounting holes on this solenoid are actually 1.6mm in
diameter. This will allow you to tap for an M2 screw. Also, although
the datasheet lists a throw of 6mm, the actual throw appears to be
closer to 4.5mm.
 

3. OEM Conducting thread bobbin

Perfect "starter thread" for wearable and e-textile projects. The stainless steel thread conducts signals with a resistance of only 27 Ohm/meter. The thread is very soft and therefore easy to handle. The diameter is 0.12mm. Bobbin of 12 meters. 

4. OEM M3 spacer bolt

Spacer bolt Hexagonal, thread M3 (20mm). Brass internal and external thread. Key width is 5.5 mm.

5. OEM copper tape 5mm x 15 meters with conductive adhesive surface

Copper tape has countless applications in electronics, from making flat traces for electrical components to RF shielding and antenna construction. Copper tape is even used to connect things with solder, such as the colored glass on Tiffany lamps. This copper tape is coated with a conductive adhesive, 5 mm wide. 

OEM copper tape 5mm x 15 meters with conductive adhesive surface (Various)
Electronics supplies + Casing
Quantity discount
11.40 CHF per piece for 2 units

OEM copper tape 5mm x 15 meters with conductive adhesive surface

Various

6. OEM Full-size breadboard with connection terminals and plug-in cable C

Set with full-size breadboard with 3 connection terminals (GND, Va, Vb)
with base plate as well as 140 plug cables/connecting cables in different
Lengths in box

A
plug-in board, also known as a plug-in board, protoboard or breadboard, serves
the mechanical fastening and electrical connection of
electronic components. In contrast to printed circuit boards
boards the components are not soldered, but only plugged in. The
is particularly advantageous for experimental setups, since the circuit
can be changed by simply plugging it in again. Plug-in boards are
often in the hobby sector and partly also in schools/education
used, because the assembly is fast and no
soldering skills are required.

Our set includes a full-size breadboard, mounted on a
stable base plate, additional 140 connecting cables, so that you can
you can immediately start building your circuits.

Breadboard:

* 4 bus lines
* 830 pole terminals
* Size approx. 160 x 54mm (without base plate)
* Size with base plate: approx. 180mm x 110mm
* Screwed to base plate incl. 3 connection clamps
* 4 rubber spacers for gluing

Connecting cable:

* Quantity approx. 140 pcs.
* Different lengths
* Ready stripped and bent
* In practical storage box
 

7. OEM EL Optocoupler (1 channel) EL 817

EL 817 Optocoupler 1 channel

An optocoupler is a component of optoelectronics and is used for
Transmission of an electrical signal between two galvanic
separated
circuits.

Please refer to the data sheet for the exact data!
 

8. OEM Set: Breadboard Transparent ZYJ-60 and 170

Set consisting of a half size breadboard (ZYJ-60) and
Shield-/Mini-Size Breadboard, transparent

Technical data (Shield Size):

* Dimensions: 45mm x 33mm x 9mm
* Contacts: 170 (17 rows 2 * 5 pins)
* Contact gap: 2.54 mm (100 mil)
* Hole shape: rectangular
* Attachment: adhesive foil

Technical data (half size):

* Size: 83mm x 54.6mm x 9.4mm (standard half size)
* Number of pole terminals: 400 (30 rows 2 * 5 pins + 100 power rails)
* Contact gap: 2.54 mm (100 mil)
* Hole shape: rectangular
* Attachment: adhesive foil
 

9. OEM Buzzer 12mm 10mm height 5V

Buzzer, 12mm Diameter, For Print / Breadboard / Hole Grid Mounting

* For 5V systems
* diameter 12mm
* height 10mm

10. OEM 10 pcs. screw Phillips M3 x 4mm

M3 Schraube / Philipps-Kreuzschlitz / 4mm (M3X4), passend zu unseren
Abstandsbolzen / Abstandshalter.