Best selling Electronics supplies + Casings from Adafruit

On this page you’ll find a ranking of the best Electronics supplies + Casings from Adafruit. To give you a quick overview, we’ve added the most important product details. This page always stays fresh and updates automatically.

1. Adafruit Heat Sink Thermal Tape 3M 8810 80mm x 80mm

Adhere the heatsink securely with the 3M thermal tape. It has been specifically designed for attaching heatsinks to ICs. It works better and is less messy than thermal adhesives or pastes, as the thickness is evenly distributed over the entire area. A perfect addition to our range of small heat sinks, either made of aluminum or copper.

It comes in a square of 80 mm x 80 mm (3" square) and can be cut into any shape and size. 

2. Adafruit Flex Perma-Proto Half-Size Breadboard

Flexible experiment and perforated board in the shape and size of a standard breadboard with the same connections. This allows circuits to be soldered from the breadboard 1:1 onto this board. It not only saves time and effort but also looks cool!

The Perma-Board is very flexible, making it suitable for applications such as wearables.

- 30 rows of 2 x 5 solder positions, 2.54 mm pitch (Half-Size Breadboard)
- 4 power rails with +/- labeling
- 82 mm x 55 mm
- 1.2 mm hole diameter
- Gold-plated finish (no oxidation!). 

3. Adafruit Perma-Proto Half-Size Breadboard PCB

Experimental / hole grid board in the shape and size of a
standard breadboard with the same connections - so you can
circuits from the breadboard can be soldered 1:1 to this board.
Not only saves time and work, but also looks cool!
By the way, it fits well in our mint-box! Thanks Ladyada ;)

* 30 rows each 2 x 5 solder positions, 2.54mm pitch (half size
Breadboard)
* 4 Power Rails with +/- labeling
* 82mm x 55mm, FR4 (0.063")
* 1.2mm hole diameter
* Gold Plated Finish (no oxidation!)

Attention: This is NOT a breadboard for plugging connections! It is
a PCB with the same layout as a breadboard, but only for
Solder connections! 

4. Adafruit AVR Sticker for ATmega 328/168

Sticker for ATMega 328/168 (DIP only, not SMD)

Greatly facilitates prototyping. Thanks to the sticker, the pin layout is immediately visible, eliminating the back-and-forth between the breadboard and the datasheet. The error and excitement rate also automatically decreases.

The item includes only the sticker - without the ATmega IC. 

5. Adafruit Altoids/sheet metal box "MINT

small sheet metal project box "MINT

approx. 6cm x 10cm x 2cm

6. Adafruit MiFare Classic (13.56 MHz) RFID Tag Bracelet

MiFare Classic Bracelet – the classic RFID tag now wearable as a bracelet. The bracelet contains an NXP S50 chip and is powered by the RFID reader via induction when it is no more than about 3 cm away. This tag can be read by any 13.56 RFID/NFC reader that supports MiFare cards. Naturally, this tag works with our RFID shield for Arduino and can be read and written using the corresponding library. This RFID has 1 kByte of memory, divided into different memory banks, and can be rewritten up to 100,000 times. Additionally, the card has a unique 4-byte ID permanently stored, which serves for card identification. This ID cannot be changed.

Technical specifications S50:
- 1 KiloByte (8 KiloBit) non-volatile EEPROM storage
- Built-in encryption engine with 48-bit key
- 4-byte unique identifier stored in the chip
- 13.56 MHz frequency

Bracelet data:
- Fits arms and legs up to 7 cm in diameter
- Made of waterproof silicone
- Reading distance approx. 1" (2.5 cm)
- Weight: 14.86 grams. 

7. Adafruit MiFare Classic

These tags can be read by any 13.56 RFID/NFC reader that supports MiFare cards. Naturally, these tags work with your RFID shield for Arduino and can be read and written using the corresponding library.

These RFID tags have 1 kByte of memory, divided into different memory banks, and can be rewritten up to 100,000 times. Additionally, each card has a unique 4-byte ID permanently stored, which serves for the identification of the card. This ID cannot be changed. 

8. Adafruit Heat Sink Thermal Tape 3M 8810 25mm x 25mm

Adhere the heat sink securely with the 3M thermal tape. It has been specifically designed for attaching heat sinks to ICs. It works better and is less messy than thermal adhesives or pastes, as the thickness is evenly distributed across the entire area. A perfect complement to our range of small heat sinks, available in either aluminum or copper.

It comes in a square of 25 mm x 25 mm (1" square) but can be cut into any shape and size. 

9. Adafruit MiFare Classic (13.56 MHz) RFID Tag Credit Card

An empty MiFare Classic Card - the classic RFID card in credit card format.

The card contains an NXP S50 chip and is powered by the RFID reader via induction when it is no more than about 5 cm away.

This tag can be read by any 13.56 RFID/NFC reader that supports MiFare cards. Of course, this tag works with our RFID shield for Arduino and can be read and written using the corresponding library.

This RFID card has 1 kByte of memory, divided into different memory banks, and can be rewritten up to 100,000 times. Additionally, the card has a unique 4-byte ID permanently stored, which serves to identify the card. This ID cannot be changed. 

10. Adafruit Altoids/ Tin Box "GUM

Small sheet metal project box "GUM"

Approx. 4 cm x 8 cm x 2 cm, ideal for Minty-Boost.

Product order
See all products