Best Berrybase products in the Development boards + Kits category
On this page you'll find a ranking of the best Berrybase products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.
1. Berrybase Official Raspberry Pi Standard HDMI 2.0 Cable -
The official black Raspberry Pi HDMI cable (version 2.0) is now available. The cable length is approximately 1 meter and supports Ethernet in addition to ARC.
2. Berrybase Teensy 4.1, with headers
The new Teensy 4.1 features a 600 MHz ARM Cortex-M7 processor, an NXP iMXRT1062 chip, four times the flash memory of the Teensy 4.0, and two additional slots for memory expansion. It is the same size.
3. Berrybase Google Coral Environmental Sensor Board
The Coral Enviro Board features temperature, light, and humidity sensors for your IoT application. You can easily add sensors to your Coral Dev Board or Raspberry Pi project with it. Four Grove connectors allow you to do so.
4. Berrybase Official Raspberry Pi 4 Micro HDMI cable, black
Raspberry Pi® Raspberry Pi® T7732AX HDMI cable [1x HDMI plug - 1x HDMI plug D Micro] 1.00m S.
5. Berrybase Raspberry Pi Compute Module 4 8GB RAM, 8GB Flash
The performance of Raspberry Pi 4 in a compact form factor for embedded applications. The Raspberry Pi Compute Module 4 features a quad-core ARM Cortex-A72 processor, two video outputs, and a wide range of additional interfaces. Available in several variants, with a range of RAM and eMMC flash options, and with or without wireless connectivity.
6. Berrybase MAKERbuino Inventors Kit
Included in delivery:
- MAKERbuino kit
- 128 MB SD card with games
- USB TTL programming module (for connecting your MAKERbuino to a computer and programming it)
- Set of additional electronic components and modules
This kit is for advanced users. It comes with a set of MAKERbuino components, wires, and a breadboard. You will receive an i2c GPIO expansion module, which allows you to expand the hardware capabilities of MAKERbuino.
Components include:
- 400p breadboard
- PCF8574 remote I/O expansion card
- 6x6x6 push button x9
- 10cm Dupont jumper wire M-M x40
- 10cm Dupont jumper wire F-F x40
- 5mm RGB LED, common anode, diffuse x2
- 100 ohm resistor, 0.25W x22
- 10k ohm resistor, 0.25W x4
- LED 5mm, red x4
- LED 5mm, green x4
- LED 5mm, blue x4
- LED 5mm, yellow x4
- LED 5mm, white x4
- LED RGB quick flash (with integrated controller) x2
- 10k potentiometer x3
- IRF540N MOSFET x2
- LDR (photoresistor) x2.
7. Berrybase Arduino 9-axis motion shield
The Arduino 9-axis Motion Shield from Berrybase enhances the functionality of your Arduino board by enabling precise measurement and analysis of complex movements. Equipped with Bosch Sensortec's advanced BNO055 sensor, this shield integrates a 14-bit accelerometer, a 16-bit gyroscope, and a three-axis geomagnetic sensor. This combination allows for the capture of three-dimensional acceleration, rotation rate, and magnetic field strength. The powerful 32-bit microcontroller processes the sensor data using the BSX3.0 FusionLib software, enabling accurate calculation of orientation and movements. This shield is particularly suitable for applications in robotics, drones, and mobile technologies, where precise motion data is crucial. Its easy integration into existing Arduino projects makes it a valuable tool for developers and hobbyists.
- Integrated BNO055 sensor for comprehensive motion measurement
- Three-axis accelerometer with 14-bit resolution
- Three-axis gyroscope for measuring rotation rate with 16-bit resolution
- Geomagnetic sensor for capturing magnetic field strength in three axes
- Compatible with all Arduino boards for easy integration.
8. Berrybase Arduino Proto Shield Rev3 (Uno Size)
The Proto Shield Rev3 in Uno size makes it easy for you to design custom circuits and solder directly onto it. You can solder both TH and SMD ICs in the prototyping area to test them with your Arduino board. The SMD area is designed for a SOIC IC with a maximum of 24 pins, while the TH area offers plenty of space for the necessary components around your project. You can even stick a mini breadboard (not included) onto the prototyping area for solder-free operations. The prototyping area also includes two power lines (IOREF and GND), two LED pads, and SPI signal output pads for boards that have SPI only on the ICSP header, such as the Arduino Zero.
Features:
- The Proto Shield simplifies the design of custom circuits.
- It provides an SMD area for SOIC ICs with up to 24 pins.
- The TH area has ample space for additional components.
- Two power lines (IOREF and GND) are available.
- There are two LED pads and SPI signal output pads.
- An ICSP connector is included.
Application examples:
- Creating and testing prototypes for electronics projects.
- Integrating additional sensors and actuators into Arduino Uno projects.
- Developing custom circuits for specific applications.
- Building and testing circuit designs without soldering.
- Creating portable projects by mounting on a surface or in a case.
Technical specifications:
- Manufacturer: Arduino
- Manufacturer SKU: TSX00083
- Compliance: REACH
- Dimensions: 54 x 69 x 2 mm
- Weight: 21 g
Delivery includes:
- 1x Proto Shield Rev3 Uno Size PCB
- 1x Header pin set.
9. Berrybase Pimoroni Pico DV Demo Base
10. Berrybase Raspberry Pi Compute Module 4 1GB RAM, 8GB Flash
The performance of Raspberry Pi 4 in a compact form factor for embedded applications. The Raspberry Pi Compute Module 4 features a quad-core ARM Cortex-A72 processor, two video outputs, and a wide range of additional interfaces. Available in several variants, with a range of RAM and eMMC flash options, and with or without wireless connectivity.
