Best Renkforce products in the Converters category
On this page you'll find a ranking of the best Renkforce products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.
1. Renkforce Notebook SATA to Notebook IDE
With this converter, notebook SATA drives (L-type), such as hard drives or DVD burners, can be easily operated via the notebook IDE interface. No drivers are required. The converter simply plugs into your drive and connects to your controller's interface. Power is already supplied through the 44-pin notebook IDE connector.
2. Renkforce HDD/SSD Eraser
With the TP100 Hard Drive Eraser, you can erase your data from a hard drive at extremely high speeds (7.2 GB/min) – without the need for a PC or laptop. There is no need to consider hard drive manufacturers or capacities. In professional use in industry and crafts, previously used hard drives can be quickly and cost-effectively cleaned and reused. It is also suitable for SSDs. With the help of the simple and intuitive menu, you can erase data in just a few steps – completely without software.
Nine different erase modes: With the hard drive eraser, you can professionally delete unwanted data. There are 9 different erase functions available:
1. Quick Erase: Deletes the index of the hard drive (data & system).
2. 1-Pass Erase: Erases the entire hard drive, including unallocated space, by overwriting each bit with 00.
3. 3-Pass Erase (DoD5220.22-M): Erases and overwrites the entire hard drive by overwriting each bit 3 times with 00, FF, and Random.
4. 3-Pass Erase (CSEC ITSG-06): Erases and overwrites the entire hard drive by overwriting each bit 3 times with 00, 11, and Random.
5. 3-Pass (HMG Enhanced IS 5): Erases and overwrites the entire hard drive by overwriting each bit 3 times with 00, 11, and Random.
6. 7-Pass Erase (VSITR): Erases and overwrites the entire hard drive by overwriting each bit 7 times with 00, FF, 00, FF, 00, FF, and Random.
7. Custom Erase: Here, you can specify how many times and with what pattern the data will be overwritten.
8. Secure Erase (NIST800-88): Erases the entire hard drive, including HPA, DCO, or other non-loadable areas.
9. Enhanced Secure Erase (Extended NIST800-88): Erases the entire hard drive, including HPA, DCO, or other non-loadable areas.
Protocol Manager: The TP100 HDD/SSD Eraser generates a protocol report for each individual erase job.
3. Renkforce Interface converter SATA to mSATA 6.35 cm (2.5")
With this converter, SSDs with an mSATA connection can be converted to a standard SATA connection. The built-in mSATA SSD is securely fixed with screws. This is advantageous for devices that are exposed to vibrations. The height of the metal frame is 9.5 mm.
4. Renkforce Serial RS232 to RS485/2 wire- up to 1200 m
Practical converter for converting an RS-232 interface to a 2-wire line. The converter is simply connected to a serial port and provides a 2-wire line of up to 1200 meters.
5. Renkforce Interfaces Converter Mini PCIe to Adapter
Use existing Mini PCI-Express cards, such as those for WLAN, USB, or SATA, in a standard PCI-Express slot. Special feature: includes a low-profile bracket.
6. Renkforce SSD M.2 modules on Mini PCIe
This M.2 module converts the M.2 B-Key interface into a Mini PCIe interface. This allows for the use of various Mini PCIe modules with USB and PCIe support. For example, WLAN, Bluetooth, GNSS, 3G, HSPA, and NFC modules can be used with the M.2 B-Key. Additionally, it is possible to use both functions simultaneously with a module that has WLAN and Bluetooth capabilities.
7. Renkforce Interface converter mSATA SSD to 6.35 cm (2.5") SATA
This converter, shaped like a 6.35 cm (2.5 inch) HDD, allows for the connection of a full-size mSATA module. It can be installed internally via the SATA 22-pin interface in your system. The mSATA SSD is inserted into the designated connector and does not need to be secured with screws. The height of the metal frame is 7 mm.
8. Renkforce Portable HDD hard disk duplicator 1 to 1
External hard drives can be cloned "stand-alone" without the need for an additional PC or second notebook. There is no need to consider hard drive manufacturers or capacities. In professional use in industry and crafts, small series with pre-formatted content can be produced quickly and cost-effectively. It is also suitable for SSDs. Create complete 1-to-1 copies of your hard drive, copy individual partitions, or just specific files – all without a PC or notebook. With the help of the simple and intuitive menu, you can transfer data at speeds of up to 90 MB/s in just a few steps. Completely without software. You just need to ensure that there is enough free storage capacity on the target drive. Unused storage space is available for subsequent partitioning.
9. Renkforce Interface Converter PCIe M.2 NGFF Low Profile Host Adapter
This PCI Express card expands your PC with an M.2 NGFF slot. You can connect an M.2 NGFF SSD in 2280, 2260, and 2242 formats to it.
10. Renkforce IDE to CompactFlash with mounting frame
The converter is a bootable drive for CompactFlash cards. With the included frame or the provided slot bracket, you can optimally use this converter for different operating systems. It is well-suited for service purposes or for installing and testing operating systems on CF. It supports Master and Slave configurations and operates completely without drivers.
