Xavax Rod lamp

330° light emission for nearly complete illumination in the room. The LED lamp is designed for use in open fixtures, allowing heat dissipation to the surrounding environment. The lifespan estimate is based on this operating mode. Lifespan is reduced due to insufficient cooling when used in closed fixtures. Use only in designated fixtures. Allow the light bulb to cool completely before replacing it and turn off the mains voltage. Replace damaged bulbs immediately. No liability for improper use. Some dimmers may affect lamp functions (flickering, noise). Mixed operation, i.e., simultaneous use of LED lamps and standard incandescent bulbs or LED lamps of different types on the same dimming circuit, is not possible. If noise occurs in dimmers that was not noticed with incandescent bulbs: the dimmer is not suitable for LED lamps. Cord dimmers (dimmer built into the power cable) require a separate on/off switch, as they may not be able to dim all the way to 0. Pay attention to the minimum load of the dimmer; otherwise, it may not start or may dim incorrectly. Simple dimmers usually work from 60W to 400W. For built-in dimmers with basic brightness settings, this must be set high enough; otherwise, the LED lamp may not turn on. Dim slowly and evenly. Do not jerk or dim quickly. Only incandescent bulb dimmers are allowed - no dimmers for transformers, etc. Touch dimmers are usually not suitable. An incorrect dimmer can permanently damage the lamp.