Xavax LED lamp LED filament, E27, 470lm replaces 40W, T32 tube lamp

Especially energy-efficient light bulb with a power consumption of only 4.5 watts. 330° light emission for nearly complete illumination of the room. Thanks to the special LED strips, this lamp matches the light characteristics of a conventional general-purpose bulb. Decorative lamp shape with a full glass housing. Pleasant warm white light color for general lighting tasks. Suitable for indoor and outdoor use.

Consumer note: The LED lamp is designed for operation in open fixtures. This allows the heat generated by the bulb to dissipate into the environment. The lifespan estimate is based on this mode of operation. Lifespan is reduced due to insufficient cooling when used in closed fixtures. Use only in designated fixtures. Allow the bulb to cool completely before replacing and turn off the power supply. Replace damaged bulbs immediately. No liability for improper use.

With some dimmers, there may be impairments in lamp functions (flickering, noise). Mixed operation, i.e., simultaneous use of LED lamps and standard incandescent bulbs or LED lamps of different types in one dimming circuit, is not possible. If noise occurs in dimmers that was not noticed with incandescent bulbs, the dimmer may not be suitable for LED lamps. Cord dimmers require a separate on/off switch, as they may not regulate down to zero completely.

Pay attention to the minimum load of the dimmer; otherwise, it may not start or regulate incorrectly. Simple dimmers usually work from 60W to 400W. For built-in dimmers with basic brightness settings, this must be set high enough; otherwise, the LED lamp may not turn on. Dim slowly and evenly, not abruptly or quickly. Only incandescent bulb dimmers are permissible – no dimmers for transformers, etc. Touch dimmers are usually not suitable. An incorrect dimmer can permanently damage the lamp.