Weidmüller Standard distributor Without bus sc

Standard distributor Without bus termination. Standard distributor without bus termination, 1-way distributor, IP 66. The FBCon DP fieldbus distributors are used to couple 1 - 8 actuators, sensors or remote I/Os to a PROFIBUS network. The branches (T-pieces) connect the individual bus components with the bus line. The respective branch line length depends on the transmission speed and should be as short as possible. The sum of all stubs must not exceed 6.6 m for transmission rates up to 1.5 MBaud. The trunk line is fed into an aluminum / stainless steel housing via EMC cable hoods and connected by means of tension clamp terminals. The sitch line to the device is connected via a B - coded M12 socket or an EMC cable gland. Terminators must be connected at the beginning and end of the PROFIBUS-DP network. The terminator modules fulfill this task. The 24 VDC power supply is introduced via the right cable gland. In order to counteract climatic alternating cycles, the housings are equipped with a pressure compensation element. Basically, the guidelines of the PROFIBUS user organization must be observed during installation. The distributors have the following features: Tension clamp connection technology. EMC cable gland. M12 plug connector. External ground connection. Uninterruptible bus operation. Pressure compensation element. Protection class IP66. Stainless steel versions, PROFIBUS-DP compatible.