WaveShare 200x200 1.54inch Black White E-Ink Display

This is a 1.54inch E-Ink / E-Paper display module with 200x200 pixel resolution, with an integrated controller that communicates via the SPI interface. This black and white display supports partial area updates, so individual areas can be updated quickly within 0.3 seconds. Updating the whole display also takes only 2 seconds. The extremely low power consumption makes it ideal for battery-powered applications. These displays are also used in retail as price tags, where they run on a battery for several years. The display has a very good viewing angle and can be read very well even in sunlight. The delivery also includes a connection cable with which you can easily connect the display to a Raspberry Pi. For an Arduino Uno or if you want to plug it into a breadboard, you will need 8 x male/male dupont cables.

Features:
Images on the display remain included even without power supply.
Ultra low power consumption. Basically the power is only needed for refreshing
SPI interface for connection to controller boards like Raspberry Pi, Arduino, ESP8266 or ESP32
Good documentation and example code available at Waveshare Wiki
Onboard level converter therefore compatible with 3.3V and 5V microcontrollers
Programming examples for the following controllers available: Arduino, stm32 and Raspberry Pi

Technical details:
Manufacturer: Waveshare
Manufacturer SKU: 12955
Type: GDEH0154D67
Driver IC: SSD1681
Operating voltage: 3.3V / 5V
Interface: 3-wire SPI, 4-wire SPI
Outer dimension: 48mm × 33mm
Display dimension: 27.6mm × 27.6mm
Pixel size: 0.138mm × 0.138mm
Resolution: 200 × 200
Display Colour: Black, White
Grey Level: 2
Partial Refresh Time: 0.3s
Full Refresh Time: 2s
Refresh Power: 26.4mW(typ.)
Standby Power: <0.017mW
Viewing Angle: >170
Weight: 22g

Included in delivery
1x 200x200 1.54inch Black / White E-Ink Display
1xPH2.0mm to 1x8Pin Female Dupont Cable 20cm.