Walimex pro per transmitter T-C Canon Mover 400 TTL

Reliable control and lightning-fast triggering. The Operator TTL remote control is designed for Canon cameras with TTL functionality. It can directly control compatible flashes, such as the Walimex pro Studio Battery Flash Mover 400 TTL, via radio (2.4 GHz). The camera with the attached Operator remote trigger automatically controls the exposure in TTL mode, eliminating the need for manual adjustments. With the Walimex pro Operator TTL remote trigger, data is transmitted to the flash or multiple flashes almost instantly, allowing for precise settings and minimal delay in triggering. The maximum synchronization time is 1/8,000 seconds (achievable with a maximum camera shutter speed of 1/8,000 seconds). If a slightly different exposure is desired in TTL mode, the exposure can be manually adjusted by up to three stops either up or down (in third-stop increments, flash exposure compensation). A multiple exposure series is also possible, creating an underexposed, a normally exposed, and an overexposed image based on the TTL readings, from which the appropriate one can be selected. The Operator TTL remote trigger can simultaneously control up to three flash groups (with one or more flashes).

Fully automatic or manual settings. In addition to fully automatic TTL exposure, you can also individually adjust the flash power using the Operator remote control. Each flash or flash group can be controlled separately, allowing you to conveniently adjust hard-to-reach flashes during the shoot. The remote control supports not only the manual mode but also the Multi mode (strobe function). All relevant parameters such as the number of flashes, frequency, and power can be controlled via the remote. The maximum supported synchronization time is 1/8,000 seconds.