RS PRO Enclosure, high temperature 89x35x30mm

Housing material: Die-cast aluminium
Seal material: Neoprene
Length outside: 89.1 mm
Width outside: 35 mm
Height outside: 30.3 mm
IP protection class: IP66
Colour: Natural
Cover colour: Natural
With flange: No
Shielded: Yes

EMI/RFI - IP66 shielded die-cast aluminum enclosures. IP66 shielded die-cast aluminum enclosures from RS Pro are made from a high-quality aluminum alloy with a natural finish and no external coating. The enclosures can withstand temperatures up to 250°C without degradation to the aluminum or enclosure construction. Various sizes and wall thicknesses are available.

Features and benefits:

• EMI/HF shielding
• Die-cast aluminum alloy ADC 12 (LM24 to BS1490)
• High-quality aluminum
• Lid is lipped to ensure EMI/RFI shielding
• Shielding is better than 40 dB at 10 MHz and 76 dB at 100 kHz
• Taper 1.5° per side cover to base
• Gasket included
• High heat resistance
• Various sizes and wall thicknesses available

Mounting:

• Printed circuit board mounting guides
• Vertical guides for PCB mounting
• Guides are on the inside of the enclosure

Enclosure/lid finish:

• Untreated aluminum, smooth
• No external coating
• If you want to paint, use powder coat
• Gasket included

IP66 protection rating:

• IP66 rating provides protection from dust and moisture
• Self-adhesive gasket, neoprene
• Cover thickness is 3 mm including gasket
• Temperature range for the gasket is from -20 °C to +80 °C

Fixing of the lid to the base:

• The lid is provided with a lip to ensure a tight fit to the base
• Taper 1.5° per side cover to base
• Tapped holes for a good fit
• Mounting holes outside the interior of the enclosure
• Recessed M3.5 x 12 mm Supadrive stainless steel screws secure lid
• Recommended tightening torque is 5.6 kgf

Temperature resistance:

• Up to 250 °C - no deterioration of material or structure.