RØDE Wireless GO II Single
Videography, Report, LiveSign in to check if flash delivery is available to you.
Different scope of delivery
- Wireless GO II Single (Videography, Report, Live)availableCHF180.–
- Wireless GO II (Report, Videography, Live)availableCHF218.–
Product details
Ultra-compact complete system for all content creators who travel alone. The Wireless GO II SINGLE consists of a transmitter and a receiver module.
The transmitter module already has a microphone optimally tuned for voice transmission. The receiver module has an analogue 3.5 mm TRS output for cameras and a digital USB-C output for Mac/PC, smartphone and iPhone.
The operation is very simple. To operate, you only have to switch on the two modules, they connect automatically. The signal quality is at its best, both analogue and digital: crystal clear and ready to transmit immediately. The transmitter and receiver have an internal battery that lasts for at least four hours. The Wireless GO II system has a range of 200 (.) metres with a clear line of sight. The scope of delivery includes a short 3.5 mm TRS cable, 2 fur windscreens, two USB-C to USB-A cables and a neoprene carrying bag.
The 4x4 cm small transmitter module has a clip on the back, with which it can be conveniently attached to clothing - on the collar or lapel. If the module is too conspicuous in the picture, you can use the 3.5 mm TRS socket on the side and connect an external microphone there, for example the Lavalier GO. If you wish, you can also record the audio signal directly in the transmitter module itself as a backup. For this onboard recording function, the module has a memory chip that is sufficient for over 40 hours of sound. For undisturbed outdoor recordings, you should always use the supplied fur windscreen. It can be easily attached to the transmitter module with its bayonet catch.
The receiver module can be easily attached to the camera's hot shoe. The module is then connected to the camera's microphone input via the TRS cable supplied. Using a suitable USB cable, you can also output the signal digitally to a computer or an Android or iOS device. For the latter, the RØDE SC15 or SC16 cables are suitable. The two buttons on the front can be used to select the output mode, mute the transmitter module and reduce the output level by 12 dB or 24 dB. The LC display shows the output mode, level and charging status of the receiver and transmitter. If necessary, you can also activate the safety mode in the receiver module, whereby the signal is output both at full level (TRS peak) and reduced by 20 dB (TRS ring). If an unexpectedly loud sound source on the main track distorts audibly, you can simply fall back on the quieter, undistorted safety track during post-processing.
The free RØDE Central software can be used to update firmware, add features and make special adjustments to the Wireless GO II SINGLE. RØDE Connect is an amazing and very easy-to-use podcast/streaming software and is also free.
The operation is very simple. To operate, you only have to switch on the two modules, they connect automatically. The signal quality is at its best, both analogue and digital: crystal clear and ready to transmit immediately. The transmitter and receiver have an internal battery that lasts for at least four hours. The Wireless GO II system has a range of 200 (.) metres with a clear line of sight. The scope of delivery includes a short 3.5 mm TRS cable, 2 fur windscreens, two USB-C to USB-A cables and a neoprene carrying bag.
The 4x4 cm small transmitter module has a clip on the back, with which it can be conveniently attached to clothing - on the collar or lapel. If the module is too conspicuous in the picture, you can use the 3.5 mm TRS socket on the side and connect an external microphone there, for example the Lavalier GO. If you wish, you can also record the audio signal directly in the transmitter module itself as a backup. For this onboard recording function, the module has a memory chip that is sufficient for over 40 hours of sound. For undisturbed outdoor recordings, you should always use the supplied fur windscreen. It can be easily attached to the transmitter module with its bayonet catch.
The receiver module can be easily attached to the camera's hot shoe. The module is then connected to the camera's microphone input via the TRS cable supplied. Using a suitable USB cable, you can also output the signal digitally to a computer or an Android or iOS device. For the latter, the RØDE SC15 or SC16 cables are suitable. The two buttons on the front can be used to select the output mode, mute the transmitter module and reduce the output level by 12 dB or 24 dB. The LC display shows the output mode, level and charging status of the receiver and transmitter. If necessary, you can also activate the safety mode in the receiver module, whereby the signal is output both at full level (TRS peak) and reduced by 20 dB (TRS ring). If an unexpectedly loud sound source on the main track distorts audibly, you can simply fall back on the quieter, undistorted safety track during post-processing.
The free RØDE Central software can be used to update firmware, add features and make special adjustments to the Wireless GO II SINGLE. RØDE Connect is an amazing and very easy-to-use podcast/streaming software and is also free.
| Audio outputs | 3.5mm analogue jack |
| Microphone type | Condenser microphone, Lavalier microphone, Speaker microphone, Wireless microphone/-system |
| Microphone Application | Live, Report, Videography |
| Audio channel | Mono |
| Item number | 18345916 |
| Manufacturer | |
| Category | |
| Manufacturer no. | WIGOIISINGLE |
| Release date | 28.1.2022 |
| Sales rank in Category Microphones | |
| External links | |
| Maximum order quantity | 229 |
| Exact colour description | Black |
| Microphone type | Condenser microphone, Lavalier microphone, Speaker microphone, Wireless microphone/-system |
| Microphone Application | Live, Report, Videography |
| Instrument microphone type | Other |
| Microphone features | Headphone jack |
| Converter principle | Capacitor |
| Polar pattern | Ball |
| Audio channel | Mono |
| Sensitivity | 100 dB |
| Sound Pressure Level | 100 dB |
| Output power | 100 dB |
| Dynamic range | 100 dB |
| Frequency range | 50 - 20000 Hz |
| Audio outputs | 3.5mm analogue jack |
| Connection Detail | TRS jack |
| Cable length | 0.02 m |
| Power supply | Rechargeable battery operated |
| Battery size | Device specific |
| Battery life | 7 h |
| Voltage | 5 V |
| Scope of delivery | Connection cable, Furry wind cover, Transport case, USB cable |
| Length | 46 mm |
| Width | 45.30 mm |
| Height | 18.30 mm |
| Weight | 30 g |
| Length | 13 cm |
| Width | 10.40 cm |
| Height | 5.20 cm |
| Weight | 180 g |
Specifications may include unverified machine translations.
30-day right of returnReturn policy
24 Months Bring-in WarrantyWarranty provisions
11 additional offers
Reviews & Ratings
Warranty score
How often does a product of this brand in the «Microphones» category have a defect within the first 24 months?
Source: Digitec Galaxus- 17.Samson1 %
- 17.Sandberg1 %
- 21.RØDE1.1 %
- 21.Zoom1.1 %
- 23.Thomson1.2 %
Warranty case duration
How many working days on average does it take to process a warranty claim from when it arrives at the service centre until it’s back with the customer?
Source: Digitec Galaxus- 6.Shure2 days
- 9.DJI3 days
- 9.RØDE3 days
- 11.Blue4 days
- 11.Maono4 days
Return rate
How often is a product of this brand in the «Microphones» category returned?
Source: Digitec Galaxus- 14.JBL3.1 %
- 14.Razer3.1 %
- 16.RØDE3.2 %
- 17.Antlion3.4 %
- 17.Liam & Daan3.4 %
Source: Digitec Galaxus