Questions about Vogels Wall 3245

53.5 cm

Hello, sorry i dont know i never used it….still in the box somewhere

But this fits. TV has VESA 300 x 300 and this is supported by the bracket.

You can use them, but if the TV falls off, that's to be expected :)

You can enter your TV model number here: https://www.vogels.com/de-ch/c/

You have to find out for yourself what the viewing angle is in the room, I have it mounted slightly to the right of the TV, not in the middle. Good luck ...

Hello, Yes, no problem, by the way, very good product Best regards Didier Pasche

I don't have the problem, the wall didn't hold for me and I dismantled it again....

When the TV is parallel to the wall, you can turn it as you like and then bring it back into position.

Hi, the top two holes must carry the greatest load. Therefore, they must be deeper than the other two. If the bracket is not fully loaded, i.e. no 55" screen is hanging on it, you can also use a smaller dowel.... Cheers

Vogels Wall Mont is a brand-independent supplier that is compatible with a wide range of popular brands. Should therefore not be a problem.

Yes, it does. Your TV is equipped with a VESA wall mount 200 x 200 mm / this can be 100 x 100 mm, 300 x 300 mm, * 200 x 200 mm *, 400 x 400 mm, 200 x 100 mm, 400 x 300 mm, 300 x 200 mm, 200 x 400 mm, 200 x 300 mm, 100 x 200 mm

hi probably holds securely is simply tested up to max 20kg. and the swivel mechanism will probably act a little differently than hoped. I would take these to be on the safe side ;D Vogels Wall 3345 (Wall, 65", 30kg) 32.- is better than - kabutter wall - kabutter tv - kabutter bracket arm - swivel not working properly hope this helps ;D Greetings

No, you do not need any additional parts, all the necessary screws are supplied. On some TVs, however, the threads are recessed a little deep in the housing, for which the TV manufacturer provides spacer screws. (This was not described in the scope of delivery for me, but was nevertheless present).

The TV is held straight by a magnet. If you pull hard on the upper edge of the TV, the TV snaps out and can be tilted downwards.

The TV weighs just under 19 kg without the stand. The 20 kg specified for the wall mount MUST be withstood by the mount in any case. Normally (especially the high-quality Vogels mounts) they can easily withstand 50% more. It is much more important that the bracket is fixed very well to the wall. In a nutshell: The wall mount should be sufficient in any case. However, if you want to buy something bigger in the future, you will have to buy a new bracket.

Works for me without any problems

Yes, everything available, incl. simple assembly instructions

According to the manufacturer, the bracket fits the TV mentioned! You can also check this yourself on the manufacturer's website: https://www.vogels.com/de-ch/c/wall-3245-schwenkbare-tv-wandhalterung-weiss Simply enter your TV (LG OLED55E7V) under "Enter the brand and model of your TV".

Yes, the wall bracket and the Samsung TV have a VESA 200 x 200 mount. It also fits in terms of size and weight. Therefore, yes. Greetings

The Sony KD55AG8 is 123cm wide, the arm of the bracket is just under 50cm long when fully extended. Pivoting by 90º is not possible. The arm should be longer (approx. 65 cm).

Yes, the TV fits together with the bracket. The wall mount is VESA 400x400 and can be adjusted. All the necessary screws are included in the set, as are the wall plugs.

No, it is VESA. It is in the description

I used it to mount a Sony 55KDL, but did not need any additional material. Everything was included.

Yes, this bracket works with this TV, you can check the bracket under "Specifications" to see which VESA dimensions are supported. The bracket says that 200 x 200mm are supported, so it also fits. :)

How wide is the TV? 43" refers to the screen diagonal. You can only estimate the width of the TV with this information.