CHF160.– currently CHF212.30 new
Lian-Li O11Dynamic XL
ATX, mATX, Mini-ITX, E-ATX
Questions about Lian-Li O11Dynamic XL
What would you like to know?
0 questions and answers
...Digitec just! :D
Helpful answer
At this time, we have no information regarding the next availability of this box. As soon as we have it, it will be updated on the website. Also, we do not have the possibility to get the riser to install the card vertically.
...later this year.
Unfortunately we don't have any information on this at the moment, I'm sorry.
I use the Vertical mount from Cablemod with a RTX 2080Super. The mount is not white but you can easily paint it with white paint as it comes in two parts. CableMod Verti PCI-e Bracket 2x DP (21cm)
Dreimal 360 Radiatoren
Helpful answer
The Silver Case is currently only available in Switzerland from pchc.ch.
...ja mit RGB, https://www.youtube.com/watch?v=Byyo4zWRwe4
digitec
6 months ago
Helpful answer
Yes, you can install the following fan configurations in the O11 Dynamic XL from Lian Li: - Top: Up to 3 x 120mm or 3 x 140mm fans. - Bottom: Up to 3 x 120mm or 2 x 140mm fans. - Side: Up to 3 x 120mm or 3 x 140mm fans. - Rear: Up to 2 x 120mm fans, but no 140mm fans. This means that your desired configuration of 3 x 120mm fans at the top, bottom and side and 1 x 120mm fan at the rear is possible. However, a 140mm fan configuration at the rear is not supported.
Automatically generated from the .
Helpful answer
Lian-Li Vertical GPU Kit for O11 Dynamic EVO
Helpful answer
can only tell you how to control it with aura sync.you have to connect the sata plug and the argb cable from the lianli hub to the header of the mainboard for addressed rgb.additionally you have to press the mod button on the case until you are in mainboard mode.then you can control the strip via aurasync in armoury crate.so i did it this way,that i set the colour red in the armoury crate software,then i pressed the mode button on the 011 until the colour appeared.then i could control the whole thing via the software.
As the product is currently on backorder, we unfortunately have no information on availability at the moment.
Helpful answer
I have a radiator at the bottom and at the side where the air comes in, and the air goes out at the top and at the back. With this setup, I have a water temperature of about 40°C - 41°C (AMD 5900x, RTX3090) and am very satisfied. As christiancf also said, it is important that the warm air goes out the top. I removed the filter mat at the top so that the warm air flows out better, but left the ones on the side and at the bottom because they suck in the dust.
Jap, passt rein.
If you have a loose contact or the cable is broken, you will have to replace the entire housing (warranty). Otherwise, go to a PC specialist who will be able to get you the 3-pin cable. If you are still under warranty, do not have the cable replaced, otherwise the warranty will expire.
Helpful answer
Yes, as far as I know you can install a radiator on the left side.
No, 280 or 360mm are the maximum.
Well, I had a 3090 with a standard fan inside, so I guess two is not a problem. There is a manual on the website with the exact dimensions. The horizontal length (back to front) will not be a problem, but the depth from the glass wall to the side wall should be considered.
Helpful answer
Hello, Yes, no problem.
Helpful answer
Gemäss Bedienungsanleitung: Hot swappable drive trays supporting 3.5" HDD x 4 <-- also 3.5" 2.5" SSD x 4 ATX PSU x 2
I only own the black one myself. But according to logic, black "absorbs" the light, whereas the white colour reflects more light back, which is why the tinted glass seems brighter here.
Helpful answer
On my version, the LOGO is engraved and cannot be removed. Personally, this does not bother me.
Good evening, Unfortunately no fan is supplied with the box :(
30 of 57 questions