
iROX Ebr707c
iROX Ebr707c
A flashing rain symbol means "storm". (Storm warning) Specifically, the barometer has registered strongly decreasing pressure, which indicates strong winds.
phu I don't know that either - the channels change continuously for me
EBR707C + a remote temperature sensor - ETS79 Regarding the temperature measurement, unfortunately I can't say exactly how it is done as I didn't get any information from the supplier, but my opinion is thatIt can be measured together with thermal sensors which should be active all the time, but I am not sure how this data is displayed on the screen. It just says that the temperature can be displayed in two ways, i.e. it can be displayed by one sensor and you have to press a button to switch to the reading of the other sensor, or that the display can change at certain intervals, I don't know unfortunately. Sorry.
Hello Here is a quote from the operating instructions: Placement of a radio sensor Place the receiving unit and the external transmitting units within the possible range of the units, i.e. within a radius of max. 75 metres. Note that the actual range of the transmitters depends on the materials used in the building and the position of the external position of the external transmitting unit and the receiving station and may be external influences (various radio transmitters and other sources of interference) may greatly distance is greatly reduced compared to the optimum possible distance. distance. If there is no reception, we recommend finding other positions for both the transmitter and the receiver. for both the transmitter and the receiver. Sometimes it is enough to just a few centimetres! Although the external transmitter units weatherproof, you should not place them where they will be exposed to direct sunlight, rain or snow. exposed to direct sunlight, rain or snow. Greetings, neptun88
The scope of delivery includes one outdoor transmitter. Additional transmitters are available in our shop: iROX ETS79 Thermo Sensor
These are crystal glasses that have the prediction symbol lasered into them. Depending on the forecast, the glasses are illuminated from below in a matching colour. In that sense, no holograms. The lighting can be switched off. There is an auto function: it switches on automatically every 5, 10, 20, 30 or 60 minutes for about 16 seconds. Unfortunately, I have no experience regarding reliability. What I can say is that the outdoor sensor measures temperature and air pressure (although the air pressure is not displayed). The forecast is calculated barometrically in the device according to an algo rhythm from the measured pressure changes. The outdoor sensor should be placed in the shade.