CHF303.–
Erard Standit 600
Wall, 85", 45 kg
Questions about Erard Standit 600
What would you like to know?
0 questions and answers
Helpful answer
I have hung a 65'' television on it. I mounted a sonos playbar underneath it with the corresponding wall bracket. However, I had to drill additional holes in the stand for this. The metal is quite thick, but it still worked quite well. Unfortunately, I can't tell you how the width of the stand will fit with your Sonos mount, but there are a few centimetres available for holes on the left and right (the cable guide is then in the middle of the back).
digitec
4 months ago
Helpful answer
The wall bracket in question is designed for use on a floor, but is not specifically adapted for a carpeted floor. However, it is fitted with an elastomer stabiliser plate that helps hold the bracket in place, which may reduce the risk of slipping on a carpeted surface. For maximum safety, it is advisable to check the stability of the stand once it has been installed.
Automatically generated from the .
no idea, our stand is also slipping...... must change the adhesives too....
Helpful answer
This is not intended per se, but you can drill the hole yourself. However, you should then pay attention to the centre of gravity of the construction.
Unfortunately not. The VESA is 200 x 300. Under this link you will find all TV stands that are compatible: https://www.digitec.ch/de/s1/producttype/tv-staender-525?filter=t_841%3D351718&take=42
M6 and M8 screws are included.
Yes. It supports up to 45kgs - we have a similar tv and it is great
Helpful answer
And yes, at first I thought the TV was too high. I finally got used to it and it's fine like that
Helpful answer
The VESA mount for the TV mentioned is 400 x 300 mm and the mount must be able to support the VESA mount and the weight of the TV. We can also offer you: Xantron Premium-600HE (Universal, 65 ", 50 kg)
Helpful answer
It's 40"-85" :) I've pointed out the error :)
The pads are included in the delivery and should be able to be claimed otherwise.
The holder is only leaned against the wall (no drilling, no screwing) could imagine that the 6cm was chosen by the manufacturer with enough safety margin, because at some point the centre of gravity is too far forward (the thicker the screen) and the holder can tip away from the wall or no longer presses with enough pressure against the wall. Especially be careful if there are small children living in the household....
The package includes necessary adaptors for curved TVs. I mounted a 55” Samsung Curved TV without need to use TV’s original parts.
The stand leans against the wall with its own weight and that of the TV. I'm not sure if a disc can withstand this weight. I would advise against it.
Yes it does.
Provided it has a depth of no more than 60mm and the back panel is completely flat, it will fit. My Samsung UE70TU7170 UXZG fits perfectly. It should also have the usual VESA mounting holes.
OLED65C9PLA does not have a wall-mounting option, I believe. Therefore- no.
no problem with a plastered wall in my case.
Hi, it's a 40 to 85 inch stand. Just check the VESA specification of the TV. But normally it's ok
Helpful answer
I have installed with Samsung TV UE65LS003 AUXZG, 65" FRAME TV, it works, that's all I know.
Hello the bracket is compatible up to 75 inches.
Hello S.greifendorf I have a Samstung UE65KS8080 mounted on it. Without any problems. The bracket is designed for TVs up to 75" and 45 kilos. For curved TVs, however, it needs longer screws, as per the description.
I would have said yes, I don't know the TV mentioned, but according to the Digitec description, it fits on a VESA 400 × 400 mm wall mount which is compatible with this product.
Which model exactly?
If the television is suitable for wall mounting, should not be a problem
Hello, no guarantee, but I think so.
Helpful answer
The thing is really heavy. The solid metal base and the weight of the TV press down. We have a sideboard in front of it, so I'm not too worried, but I wouldn't let the kids run around it for safety's sake.
Helpful answer
It works. We have 65 inch Samsung on it. The mount is designed from 40 to 75 inches. We are very satisfied with it.
30 of 47 questions