Questions about Devolo Magic 1 WiFi Multiroom kit 2-1-3

Yes, you can.

I installed this at my place 2 days ago. It consists of a LAN adapter that serves as a 'base' (and only has LAN) and 2 LAN/WLAN adapters. The WLAN can be switched on and off individually for these two adapters at the touch of a button (or via the Devolo software). The Powerline function continues to run anyway. At the moment I use the adapters only in powerline mode without any problems. Note: During installation, follow the (simple) instructions exactly. Otherwise the adapters will not initialise correctly. I had also thought that I could ignore the instructions....

Hello Of course you can remove the wifi. But the fixed network only works at 100 Mbps. The modem doesn't work with wifi boxes.

Good evening. In the app's user interface, you can set the Wi-Fi network to 2.4 GHz and/or 5 GHz or deactivate it completely. However, I don't know how you can reactivate it, e.g. after the tablet no longer has Wi-Fi access.

No, you will have to buy it separately

Hello, there are only 2 adapters active as WLan transmitters and the Lan connections on these two are limited to 100Mbit!

Check the manual: https://www.devolo.de/fileadmin/Web-Content/DE/products/hnw/magic-2-wifi-next/documents/de/devolo_Magic_2_WiFi_next_0820_de_online.pdf The first time you log in, you have to set the password, by default no PW is set.

I had only bought one set, but had informed myself beforehand and read about no restrictions that the system is not expandable. Only that components of older models (dLan) are not compatible. I found the configuration a bit tedious (ok, I only read the quick guide afterwards ;-) ), but what helped me was the Devolo website itself (https://www.devolo.ch) and the support section with lots of questions and good answers. I had a quick look and found this answer to the question "Do Magic add-on adapters install automatically? "No. You have to add the new device with one of the previously installed devices by pressing a button. To do this, first select an adapter from the existing network, then please press the encryption button of the new adapter." I can imagine that devices from another set are to be considered like an add-on adapter. The Devolo Cockpit (also available for download on the Devolo website) may also help with the configuration. Good luck!

I had no problems with the installation and it works fine. It might help to completely uninstall the old software (Devolo Cockpit), reboot the PC and only then install the new software? Good luck