Questions about De'Longhi Magnifica S

I would say that for "B" the front and the body are black. For "SB" the front is silver and the body is black (silver black).

Digitec (or any other Swiss dealer) is obliged to supply electrical appliances with a Swiss plug. If the appliance is supplied with a foreign plug, a suitable replacement cable should be supplied if the mains cable is pluggable or alternatively if the mains cable is permanently connected, a suitable adapter should be supplied. If the appliance is delivered without a suitable plug, complain to the customer service and insist on a cable or an adapter, free of charge. Info Digitec --> https://helpcenter.digitec.ch/hc/de/articles/4402084170386-Fehlender-Adapter Point 1 --> https://www.esti.admin.ch/de/themen/faq/elektrische-erzeugnisse-marktueberwachung/

So for 6 people, this machine is perfectly adequate. Bear in mind that this machine does not have a large selection of drinks. A different machine might be worthwhile. https://www.meistervergleich.de Here you will find, in addition to coffee machine comparisons, the perfect buying guide for a fully automatic coffee machine.

Schuko with adapter.

The milk container almost 0.6 litres

Yes, you can heat the milk and make foam with the steam nozzle, excellent thick foam!

Yes, the machine is supplied with a CH plug. Greetings Domi

You must also change the amount of coffee. The regulator must be set to approx. 75 % for cream and to approx. 90 % for espresso. The regulator is in the middle at the front.

This may be due to the fact that we work with different suppliers and we can get one colour cheaper, for example.

...the machine does not need a power supply unit, it goes directly to the 230 V mains with the usual appliance cable.

Take advantage of 20% discount on all kitchen machines, stand mixers, coffee machines and accessories until 6 November 2017. Simply enter the voucher code KUECHE20 during the order process under "Payment".

Switch off, unplug, wait a good moment and start up again?

I've had the machine for about a month now and I don't know the problem. I have set mine to switch off automatically after 15 minutes without use. Try this once, otherwise there is probably something wrong with your machine.

The machine has a Schuko plug. A small adapter was supplied.

I use a grind between 2 and 3, which is relatively fine. Set it as low as possible so that the water still comes through continuously and doesn't drip. Have you set the powder quantity as high as possible?

Unfortunately, we do not currently offer any spare parts for this coffee machine in our range. I would recommend that you enquire directly with the manufacturer, they may be able to help you.

We work with daily prices, which can be influenced by various factors such as purchasing conditions, stock levels and supply and demand.

Our machine was supplied with a CH plug.

Yes, the brewing unit can be removed to wash it. To do this, remove the water tank, open the flap and press the two red buttons simultaneously to carefully pull out the brewing unit.

The machine is set by default so that it switches off automatically approx. 15 minutes after the last brew. This means that the surface hardly gets warm enough to be used as a cup warmer; it is only suitable for storage.

Oui / Sì.

Mine has a Swiss plug

Unfortunately, we cannot offer this product in white.

Now I'll answer the question myself and for others if they are interested. The current offer is delivered with a Swiss plug. As we didn't want to wait for the answer and still wanted to take advantage of the 20% voucher, we called Galaxus customer support. They said it was a Schuko with adapter. Would actually be perfect as it was intended as a gift in Germany. Ordered yesterday, arrived today. Plug? Switzerland. Device goes back as not as expected. A corresponding review regarding product description (unfortunately often wrong at Galaxus) and ignorant support follows via the account of my partner (buyer).

I was able to set the amount of liquid for each product individually during commissioning.

According to my research, article 289510 is manufacturer number ECAM 22.110.B, and article 34723420 is manufacturer number ECAM 20.110.B. I could not find any major differences online / at our supplier, possibly it is a revision with minor cosmetic changes.

see answer from Ploper88