Questions about De'Longhi Magnifica Evo

Yes

We work with daily prices, which can be influenced by various factors such as purchasing conditions, stock levels and supply and demand.

I had the same problem. My grind was completely out of adjustment.

36cm is not correct!!! Depth is 43cm (+/- 3mm) !!!

According to the manufacturer, the water tank has a volume of 1.8 litres.

Hello I'm not a K-machine specialist, but it sounds quite strange. I would contact the manufacturer's customer service. I myself use the beans from "Cafe Royal" or "Mövenpick" and have no problem with the medium grinding level. The coffee is great and so is the grounds.

I have never had the need for pure milk foam until now. However, since only coffee with milk foam is available via the menu selection, the statement "Not possible - only milk foam" is correct. The only possibility is to quickly change the cup before preparing the milk foam, but you didn't want coffee.

Yes

I have not measured it. But I would say that it is in the range of all other machines.

No. Milk must go in the tank

I have to descale about every 5 weeks. I use normal tap water. I used to buy a Delonghi lime scale. (Every month, which is quite expensive. ) But it works just as well with much cheaper limescale rings. I have had Delonghi machines for years, I think they are very good.

You can find spare parts via the following link: https://fixpart.ch/de/appliances/delonghi-ersatzteile-und-zubehor?gclid=EAIaIQobChMIoKWN6OP4_AIViPh3Ch2IzgT6EAAYASAAEgJhEPD_BwE

There is the x2 option, so I think so. I am a single person household. What I can say though, this coffee machine makes great coffee. I am very satisfied.

The height and depth were mixed up, I measured them, both machines are 44cm deep and 36cm high.

Depending on the supplier: 1 water hardness filter is included, other filters can be ordered: De'Longhi DL-SC002 (1 pcs)

The manual describes how to disassemble the milk container and clean it manually, but I didn't find anything about automatic cleaning. That seems to be quite an effort when I look at it like that: CLEANING THE MILK CONTAINER Caution! - Do not use abrasive cleaners or sponges to clean the milk container, and do not use any metal objects to avoid metal objects to remove possible milk incrustations. milk encrustations. The milk container must be cleaned after each milk preparation, To do this, proceed as follows. 1: 1. remove the lid of the milk container and remove all the removable parts. 2; 2. pull out the milk suction tube. 3; 3. turn the milk dispensing tube to a vertical position and pull it out. and pull it out. 4; Press the button to pull out the connector. 5. 5. in the dishwasher (recommended): Rinse all the parts and the container under hot running water (at least 40°C): then position on the dishwasher's top shelf and start a programme at 50°C. dishwasher and start a programme at 50°C, e.g. ECO Standard. By hand: rinse all the parts and the container in hot running water (at least under hot running water (at least 40°C): then immerse all then immerse all parts in hot drinking water for at least 30 minutes. (at least 40°C) with a mild / neutral detergent and rinse abundantly with hot drinking water. rinse with hot drinking water. 6. check the cleanliness of the air tube (on the magnification); then cleanliness. 7; 7. reassemble all the parts of the cover: to reinsert the the connector, press the corresponding button press the corresponding button; 8. snap the lid back onto the milk container.

Kunststoff

Unfortunately, the article does not carry a supplier. So we can not offer the version either.

No, just milk foam.

Due to different suppliers and delivery conditions, there may be price differences compared to other suppliers. We always try to set a price in line with the market.

No, but a mini adapter is supplied free of charge with the device. This does not affect the function or use of the device. [Max Hauri Socket Adapter (Type E+F (CEE 7/7))(https://www.galaxus.ch/fr/s4/product/max-hauri-adaptateur-de-prise-de-courant-type-ef-cee-77-adaptateurs-pour-prise-electrique-6154968)