CHF369.–
Corsair Vengeance LPX
2 x 32GB, 3200 MHz, DDR4-RAM, DIMM
Questions about Corsair Vengeance LPX
What would you like to know?
0 questions and answers
Helpful answer
Hello Josh,
No, you don't have to set anything. The only important thing is the dual channel (if you look at the RAM slots, it is always 1+3 and 2+4 with 4 slots).
But since you buy 2 additional slots, this is done automatically anyway, you don't have to set anything unless you want to overclock the RAM (voltage etc.).
Helpful answer
Have you activated the XMP profile in the BIOS for the RAM?
Yes, I have always had good experiences with Corsair Vengeance RAM on Ryzen systems :)
Former employee
6 years ago
Unfortunately, we do not have any exact information on this. However, these fit https://www.digitec.ch/Comparison/5830167-9075423
Helpful answer
hey, i have the 2x 16GB of these sticks running on a MSI B450 Tomahawk @3333Mhz. my cpu is a 2700X, so i'm pretty sure it will work with a 3700x as well. the Tomahawk board is a good choice, it has enough power for a 3900x.
IN KOMBINATION MIT WELCHEM MAINBOARD?
It is another supplier, we can't obtain the product for the price of 119chf at the moment.
Helpful answer
Neither; it's a CL 18 memory. The XMP profile is 18-22-22-42
The difference is actually insignificant, as you may have noticed, only one letter in the manufacturer number is different. This means that the cheaper version (CMK16GX4M2D3600C18) is also optimised for older chipsets, e.g. Intel Z390. Nowadays, however, this makes no real difference.
To the second question: They have identical specifications (also e.g. latency). So there is no difference in performance here. It is best to buy the bars that you like better visually or that fit your system better.
In my case, the PC would not start at all, I guess there is no other way to solve it.
Helpful answer
Servus.
I would choose 2 slots with 32 GB each.
Then you still have the option to upgrade to 128 GB with an additional 2 x 32 GB.
Greetings from Bavaria
guggst du hier:
https://www.msi.com/Motherboard/support/B450M-PRO-VDH-PLUS#support-mem-14
We work with different suppliers and daily prices. For this reason, the price of an item may be adjusted upwards or downwards over time.
Helpful answer
These Corsair Vengeance LPX come in a red colour.
Helpful answer
What do you think you can achieve with 4000 and co. if your CPU is only designed for up to 2666 Mhz? It won't be any more, you can put whatever you want into it.
Former employee
1 year ago
Helpful answer
We have a limited lifetime warranty from the manufacturer here, as we cannot represent this otherwise. Was stated 30 years.
Helpful answer
it is not possible to install ddr4 in a ddr3 system.
Helpful answer
it's quite unlikely. they are for desktop pc-s, they are quite big with heatsinks.
laptops need much smaller ram modules.
i think it should be possible to filter the results for laptop rams.
Helpful answer
dmidecode sagt Single Rank, passt zur Width von 64 bit.
Handle 0x003D, DMI type 17, 92 bytes
Memory Device
Array Handle: 0x0034
Error Information Handle: 0x003C
Total Width: 64 bits
Data Width: 64 bits
Size: 16 GB
Form Factor: DIMM
Set: None
Locator: DIMM_A2
Bank Locator: BANK 1
Type: DDR4
Type Detail: Synchronous Unbuffered (Unregistered)
Speed: 2133 MT/s
Manufacturer: Corsair
Serial Number: 00000000
Asset Tag: Not Specified
Part Number: CMK32GX4M2E3200C16
Rank: 1
Configured Memory Speed: 2133 MT/s
Minimum Voltage: 1.2 V
Maximum Voltage: 1.2 V
Configured Voltage: 1.2 V
Memory Technology: DRAM
Memory Operating Mode Capability: Volatile memory
Firmware Version: Unknown
Module Manufacturer ID: Bank 3, Hex 0x9E
Module Product ID: Unknown
Memory Subsystem Controller Manufacturer ID: Unknown
Memory Subsystem Controller Product ID: Unknown
Non-Volatile Size: None
Volatile Size: 16 GB
Cache Size: None
Logical Size: None
No, this is DDR4 RAM and that motherboard is only compatible with DDR5.
Helpful answer
No, the only thing to do is to go into the bios to change the X.M.P profile, which is an overclock profile predefined by the distributor. There is no risk in the bios as long as you don't change the other parameters. There are plenty of tutorials on the internet that simply explain how to do this.
30 of 147 questions