Corsair RGB Fan LED Hub
1x
Questions about Corsair RGB Fan LED Hub
What would you like to know?
0 questions and answers
is it included with the corsair comander pro or with another rgb controller (don't know the name of the others )
I didn't have one with the hub, but 2 for the two channels with the Lightning Node.
Helpful answer
Yes, you can control them that way. However, you still need a Corsair Lighting Node Pro to be able to connect the whole thing to the board.
The cable is connected to a SATA port best regards
UBS
The Fan Hub is merely an extension of the Corsair Commander Pro. The Fan Hub cannot be operated independently.
Incorrect configuration (type/number) of the connected RGB devices / fans.
Helpful answer
It's a hub that connects to the Commander. It cannot be used without it.
No, you will have to use the RGB hub from NZXT.
Former user
3 years ago
Yes, I think so, because it doesn't work with just the hub.
Yes you can
You are not doing anything wrong in that sense.
It is a little fiddling because the trap gets stuck easily.
Do not try to force it
did you use slots 1-4?
Are all the fans the same model?
Have you set the model selection in the software correctly?
if so, reinstall the software... or do without corsair for good.
Um, no. The enclosure has no connections. The power supply unit that you have installed has such connections :-)
I have just bought this product. However, you can't get a cable that goes into the motherboard. I had to buy a Lightning Node Pro, which you can only buy as a package.
Everything you need is included in the set. There is no additional cable to buy.
In the case of Corsair, it even depends on the fan type whether they are compatible with the RGB hub.
LL and QL fans have different RGB hubs. If you connect them to the wrong hub, the fans will light up but will not be controllable.
Personally, I would buy a set with the correct hub.
The commander pro is controlled via a usb header
Former user
4 years ago
Hm, I'm not quite sure what you mean but maybe this will help:
Alphacool connection cable 3pin to 3pin digital RGB
Yes, just select the right fan in the sofftwear.
The best way to use the fans is to use the Corsair RGB Fan LED Hub and the Commander Pro connected to the mainboard (USB) and the RGB HUB to the Commander PRO. The fan connections are then connected once each to the RGB HUB and to the Commander Pro and then controlled in Windows via the software.
Former employee
5 years ago
Non, il vous faut utiliser un fan splitter dans ce genre : https://www.digitec.ch/fr/s1/product/ekwb-ek-cable-y-crossover-pour-3x-4-pin-pwm-fans-10cm-modding-gaines-5708739
Helpful answer
I was also extremely confused by this Corsair system. I used this guide and found the right products: https://forum.corsair.com/v3... According to the guide, this hub does not have a USB interface. In your case, you need a controller with a channel output to control the RGB. I have a Corsair channel output directly on my MSI board and therefore only need this hub for my fans. If you don't have that, a Lighning Node Core is recommended, which has the USB header to be controlled via iCue. If you also want to control the fan speed via iCue, use the Commander Pro.
30 of 59 questions