Corsair 680X RGB
ATX, mATX, Mini-ITX, E-ATX
Questions about Corsair 680X RGB
What would you like to know?
0 questions and answers
There are 4 fans: the 3 front ones in RGB as in the picture and a "normal" one without RGB at the top rear.
Yes, that's no problem - the housing is big enough.
Helpful answer
According to the information available in the Corsair documentation, the maximum supported length for the graphics cards is 330mm.
If we refer to the dimensions announced on the MSI website, their GPU would unfortunately be too long for this case.
Hi Gafuri
If the card is shorter than 33 cm, it should fit.
As far as I have found out, the card you are referring to is 31.85 cm long.
Regarding the riser cable, I would recommend the following: Thermal Grizzly PCIe 4.0 x16 Riser Cable (30 cm).
This also supports PCi-E 4.0.
Be aware, however, that riser cables usually have a small performance penalty.
Greetings
Helpful answer
Hi, screws will be delivered with the case. See the documentation: https://www.corsair.com/corsairmedia/sys_master/productcontent/WW_CRYSTAL_680X_QSG_revAC_.pdf
Cables will be part of the motherboard and power supply delivery package.
Helpful answer
The white case is generally more expensive on the market, which is also evident here. It may be that the purchase price is already higher or the supply is lower, all this has an influence on the price.
As stated in the specifications, 3x 120mm fans are already installed in the front and on the back.
1x 120mm
Hello iceleguan11
Important! The tower includes an adapter for the control of six RGB fans. If you order a three-fan set from Corsair, you automatically get an additional adapter for another six RGB fans. I bought the RGB-Pro right away so that I don't have to connect the fan control (PWM) directly to the mainboard.
Greetings Tom the Train
Helpful answer
Unfortunately I don't think so, my GPU measures 29.9cm long and I still have about 30mm of space between the GPU and the fans on the front.
Helpful answer
You do not need a kit, a riser cable should suffice. Mechanically, the bracket for vertical CPU installation is available.
I think so, I installed the Corsair 150 pro (3 fans). The graka 2080 ti hardly has any space, but it also fit in, but I had to pull the case open a bit by hand.
Helpful answer
H150 can only be mounted in the front
Depending on the cards, there might be enough space. Here you will find some more information https://www.corsair.com/de/de/Kategorien/Produkte/Geh%C3%A4use/Crystal-Series-680X-RGB-High-Airflow-Tempered-Glass-ATX-Smart-Case/p/CC-9011168-WW
Helpful answer
It should work if the sound card does not protrude beyond the screw with which you fasten it.
Helpful answer
Should be no problem to mount this on the front.
Li 120
The mounting above should work Have a look at the pictures on the Corsair website: https://www.google.com/search?q=Corsair+680X+RGB&client=firefox-b-d&sxsrf=ALeKk00QJKxqxIqC3iEYZB_NZJreBLT3Wg:1585256246076&source=lnms&tbm=isch&sa=X&ved=2ahUKEwj0nrPbg7noAhUFSRUIHeu3AR8Q_AUoAXoECAwQAw&biw=2176&bih=1111#imgrc=7DLzvzPVfM5RlM
Helpful answer
No, you still have to buy a Pcie riser.
No, you can't control fans with it. I bought the Node Pro with it and I don't regret a centime...
Helpful answer
The fan controller and a Node Pro are installed in the housing. You would have to buy the Commander Pro as well.
I don't work at Digitec, but I think they only had the promotional prices until the end of September, now all Corsair products should be back to the regular price.
29 of 29 questions
