Questions about be quiet! Pure Base 500DX

There is room for 6 140mm fans (3 front, 2 top and 1 rear). However only 3 are supplied and they are mounted on the front, back and top.

Take a look at the manufacturer's website, where you can actually get all the individual parts

Hi, this should fit! The specification of the maximum graphics card length is independent of the cooler. Take a closer look at the 4th photo. You can see that the cooler is inserted from the front. This means that the 369mm refers to the length from the back to the mounting of the cooler.

Yes that goes without problems

No it hasn't.

No. 3x 140mm are not possible in the front. See manufacturer https://www.bequiet.com/de/case/1854 I just used this case for a system and installed 3x 120mm. But the lowest fan is of little use because the HDD cage has almost no air slots, so about 80% of the fan surface is covered.

Hello, Unfortunately, we don't sell spare parts for this case. We'd recommend contacting the manufacturer directly.

You can mix the 140 mm fans in the be quiet Pure Base 500DX with the be quiet Light Wings 140 mm fans without them all having to be RGB fans. - The case supports the use of different fan types, including the Pure Wings and Light Wings from be quiet! - There are no restrictions that require all fans to have RGB functions, so you can easily combine them. This allows for flexible configuration to cater for both good airflow and aesthetic requirements.

This is just a comment without a question! What question is being asked here?

A standard size. Important, no mini

Hello The best way is to contact BQ directly. There is a contact form for spare parts on the website where you can make enquiries or place orders straight away. Here is the link https://www.bequiet.com/de/contact/spareparts Many greetings Tom Lang

3! On the Be Quiet homepage it says: "3 Pure Wings 2 140mm fans for high cooling performance with quiet operation" and that's how many were included.

ja...360mm allerdings nur in der front...hier mehr specs zum case....https://www.bequiet.com/de/case/1854

no

Hi, a max. 240 cooling unit goes in the top. So usually 2 fans. You can install a 360 in the front (3 fans).

it works,the question is which size...in the lid 2x120mm or 2x140mm...in the front 3x120mm or 2x140mm....here are the specs for the case...https://www.bequiet.com/de/case/1854

140 mm Pure Wings 2 are installed. I do not see a manufacturer's number as you write. I see BQPUW2

According to https://www.bequiet.com/en/case/1855 and https://www.bequiet.com/en/case/1854 the dimensions should be identical. 463 mm ist the height with stand and 443 mm without it.

No, only a 240 on top. A 360 fits in the front (front), but then the bracket for the HDD has to come out, I think. Greetings

You can do that, yes; a 360 in the front; a 240 on top; optionally a 120 in the back... Get in touch if you need help; I've even got some used stuff if you want to get in on the cheap.

Good day I installed a system in this enclosure in October, so I still know the details. The enclosure comes with an ARGB (5V) strip installed. This can either be connected directly via the mainboard or operated with the pre-programmed colours and patterns. According to the manufacturer's data sheet, your mainboard, the MSI B450M Pro-VDH Max, has only one RGB (12V) connection. This is labelled JRGB1 on the mainboard. Therefore, you cannot connect the LEDs of the case directly to your mainboard. For the power supply of the case LEDs you need a free SATA power connector (15pin) on your power supply or if only MOLEX connectors are free, an adapter MOLEX to SATA. (m/f). If you want to use another mainboard, make sure it has an ARGB connector or an RGB connector with 5V. Greetings Frownwarrior

Hi, this is just the case. Data cables come with the mainboard. Power cable with the power supply. Greetings

These are 3 pin fan connectors