ASUS Strix X470-F Gaming (AM4, AMD X470, ATX)

ASUS Strix X470-F Gaming

AM4, AMD X470, ATX

Questions about ASUS Strix X470-F Gaming

What would you like to know?

0 questions and answers

6 years ago

Hello dear Digitec team :) Is there a possibility to get this board with the latest BIOS for an extra charge? If so, what would that cost? (The long wait for the B550 is killing me :D)

6 years ago

Performing a BIOS update is not that difficult nowadays. Current BIOS version of this mainboard: Version 5220 from 2019/09/24 Manual: https://static.digitecgalaxus.ch/Files/2/8/3/5/8/8/2/0/G14093_ROG_STRIX_X470-F_GAMING_UM_V2_WEB.pdf from chapter 3.11

6 years ago

Which working speciehr of gskill can be used here?

6 years ago

Enclosed you will find all RAM compatibility lists for the different generations of CPU's which are compatible with this mainboard: https://www.asus.com/ch-de/Motherboards/ROG-STRIX-X470-F-GAMING/HelpDesk_QVL/

6 years ago

Does this mainboard have WLAN? Can I make a Raid 0 out of 2 Samsung M.2 SSD on it?

6 years ago

Hi. No, no Wifi. Raid0 is possible, but there are various configuration notes - some of them restrictions - that must be observed. Siehe im Manual: https://dlcdnets.asus.com/pub/ASUS/mb/SocketAM4/ROG_STRIX-X470-F-GAMING/G14093_ROG_STRIX_X470-F_GAMING_UM_V2_WEB.pdf?_ga=2.5001203.1364389653.1542038275-1301831558.1518769416

6 years ago

Does the mainboard support Ryzen 3000 out-of-box? or is the corresponding BIOS update already installed? Or do you still have to do this manually? Thanks

6 years ago

Helpful answer

It is not Ryzen 3000 compatible, you need to do a BIOS update.

6 years ago

Can I run 4x 8GB memory modules on it in Dual Channel or should I use 2x 16GB?

6 years ago

Helpful answer

You can use 2×8 + 2×8 in dual channel. So you have 2x16 running separately. How big the difference is to 2x16 dual channel I can't say.

7 years ago

I'm a bit confused about the new USB3 naming. Does USB 3.1 = gen2 (10mbps) mean anything to you? Specifically, does the ASUS STRIX X470-F GAMING have USB3.1 gen2 or are only the new Intel Z390 boards equipped with it?

7 years ago

USB 3.0 / also called Gen1 - 5 Gbps USB 3.1 / also called Gen2 - 10 Gbps

3 years ago

Hi, I bought this motherboard a couple of years ago, is it good enough for a new setup with a 3090 TI GPU, 64gb RAM or should I rather buy a new one?

3 years ago

Basically, the mainboard is not a weak point. Which processor is used?

4 years ago

Where can I get this cable usb31g2_c1 individually?

4 years ago

The usb31g2_c1 connector on this board is intended for internal USB 3.1 front panel cables, which are often used in modern enclosures. These cables are usually fixed to the enclosure, but we would have the following cables in our range: https://www.digitec.ch/search?q=usb%203.1%20intern

5 years ago

Does this motherboard support zei m.2 SSD? Because I got 2 from my brother and now I don't know what to do.

5 years ago

Helpful answer

This board offers two M.2 slots.

5 years ago

Hi, I have this mainboard with Samsung EVO 970 (500GB) SSD. And now I would like to buy another Samsung EVO 970 (1 TB) (Prod. No: MZ-V7E1T0BW) . But I am not sure whether both will be fit to the mainboard? I know that it has two M.2 slots but not sure about dimensions. If 1 TB SSD does not fit, which ssd do you suggest? Thank you

friedrichbraile

5 years ago

Download the "technical data sheet" from the mainboard page here on digitec and check page 1-18, it will explain what M.2 supports.

5 years ago

I can only confirm A-J Computer. I am now on a 20-day wait. I have been constantly put off. I am in contact with support and will now have the order deleted.

5 years ago

Thanks for the info!

5 years ago

Hello I don't know much about this so I was wondering if a Ryzen 5 3600 would fit in this motherboard? thanks in advance!

5 years ago

Hello, yes the Ryzen 5 3600 fits and it works. Greetings

5 years ago

This board has no Bluetooth or.

5 years ago

No and also no WLAN

5 years ago

Is WLAN and Bluetooth already connected in the mainboard?

5 years ago

No

5 years ago

If I have a Ryzen 7 2700x processor, do I still need to do a BIOS update?

5 years ago

Must? No. But of course it is recommendable in any case.

5 years ago

Are SATA-3 cables included?

5 years ago

Yes, almost every mainboard comes with cables. It is rather rare that no cables are included.

6 years ago

Unfortunately, the mainboard does not work for me. The display is always black. The LED on the board says that the graphics card is not recognised, but it is running on the other computer. I then tested the HDMI port on the mainboard, but that connection doesn't work either. It should work like this, shouldn't it? I checked the cable. Both ATX connectors are plugged in. Does anyone have any idea what the problem could be? Is the card defective? Can I exchange it?

6 years ago

The HDMI port on the mainboard also only works if the processor has an integrated GPU.

6 years ago

Hi, is the motherboard compatible with the Pure Steel Rgb enclosure? With regard to the Rgb header. Have a nice day!

6 years ago

Yes, that fits.

6 years ago

Does Digitec offer a bios update from the company? So that the motherboard already works with Ryzen 3xxx?

6 years ago

Good day If so, ASUS should offer an update.

6 years ago

Hello, Is this motherboard compatible with Ryzen 3rd Generation or do you have to update the bios after buying? Thanks in advance!

6 years ago

Helpful answer

Yes, it is compatible, the new cartemaire is the x570 but the x470 are compatible

6 years ago

Is this mainboard recommended for the Ryzen 7 3800x? Thanks for the answers.

6 years ago

ASUS STRIX X470-F GAMING with AMD Ryzen 7 3700x or 3800x is it possible? If so, do you get 100% performance?

6 years ago

The new Ryzen processors are not yet available.

6 years ago

Are these DDR4 Ram -> gskill-trident-z-rgb-2x-16gb-ddr4-3600-dimm-288-ram compatible with this mainboard (paired with Ryzen 7 2700X CPU)? I can't find any information about this anywhere. (Digitec link to the product -> https://www.digitec.ch/de/s1/product/gskill-trident-z-rgb-2x-16gb-ddr4-3600-dimm-288-ram-6134885) Would be very very grateful for an answer :D

6 years ago

hier siehst du was zu deinem mainboard alles passt http://www.gskill.com/en/configurator?manu=29&chip=3396&model=3407

6 years ago

Hi guys, according to the specifications, max. 3466 Mhz OC is supported. That means a memory with 3600 Mhz makes no sense? I am looking to build a PC with this motherboard + Ryzen 2700X and Corsair Platinum RGB (4x 8GB, DDR4-3200), is this memory compatible with this motherboard? Thank you in advance. LG

6 years ago

Helpful answer

6 years ago

I bought and installed this board with an AMD Ryzen 7 2700X, Samsung 970 M2 SSD, Palit GeForce 2080 Ti, 850W PSU. The problem is that when I run it, nothing comes up on the screen. I tried HDMI and DisplayPort on the internal and external GPU. I have tried the mouse and keyboard with cable on USB 2 in the front and on USB 3 slots on the motherboard. What do I have to check so that I can at least get into the BIOS?

6 years ago

Helpful answer

after trying 1000 times it worked, I only had a monitor plugged into the display port next to the very small connector on the GPU.

6 years ago

Does the Ryzen 2700X work directly on the motherboard or is a bios update required? If so, does the update require a 1st gen CPU or can it be done directly from the board?

6 years ago

Helpful answer

Ryzen CPUs of the second generation are supported directly out-of-the-box on mainboards with a 400 chipset, such as this one.

6 years ago

Does the dark rock pro 4 fit here ?.. as the heat sink is very wide

6 years ago

https://www.galaxus.ch/de/s1/QuestionAndAnswer/passt-der-kuehler-auf-das-asus-rog-strix-x470-f-gaming-mainboard-mit-den-gskill-trident-z-rgb-16gb-2-124930

6 years ago

Which RAM in clock speed 3000 or higher can you recommend here?

6 years ago

7 years ago

Can the Cooler Master ML240R RGB be controlled with the mainboard? (aRGB)

7 years ago

Helpful answer

As far as I know there is an rgb controller included that can be connected to a normal 4 pin.

7 years ago

Is it possible to install a 3 slot high graphics card and an m.2 SSD?

michel.eichelberger

7 years ago

Helpful answer

Yes, that is no problem. With the 3-slot graphics card you simply occupy the first PCI-E x16 and cover 2 PCI-E x1. The M.2 SSD can easily be placed a little further down.

30 of 31 questions