ASUS Rog Strix X570-F Gaming (AM4, AMD X570, ATX)

ASUS Rog Strix X570-F Gaming

AM4, AMD X570, ATX

Questions about ASUS Rog Strix X570-F Gaming

What would you like to know?

Avatar

0 questions and answers

avatar
ByArchi

2 years ago

My Rog Strix X570-F seems to have a loose contact on the powerswitch pins. I have to press this repeatedly until the PC starts up. It's not the powerswitch, as I've already tried several. Can I try something or repair it myself? Or is this a warranty case?

avatar
Nemesis69

2 years ago

If the MB is still under warranty, send it in. Otherwise, at most an electronics technician can try to re-solder the pin on the MB. (But this is always a bit tricky)

avatar
llusik

3 years ago

How so there is a motherboard + Ryzen 7 5800X set although the motherboard only says 2nd Gen, 3rdGen? Can it now be used with a 5th Gen CPU? Link zum Set: https://www.digitec.ch/de/s1/product/asus-strix-x570-f-ryzen-7-5800x-am4-amd-x570-atx-mainboard-15737374

avatar
gschwinds

3 years ago

Helpful answer

The 5 in "Ryzen 7 5800X" does not stand for 5th Gen CPU. This is the case with Intel, but not with AMD. Ryzen 7 5800X = Zen 3 = 3rd generation And instead of using very imprecise specifications such as "supports generation x". It is better to check with the manufacturer of the motherboard. For each board, there is a list of exactly which CPUs are supported, including the necessary BIOS version. For this one, for example, https://rog.asus.com/ch-de/motherboards/rog-strix/rog-strix-x570-f-gaming-model/helpdesk_cpu And another money-saving tip. If you buy the parts individually instead of the set, you currently save 39.-. This happens very often with sets put together by Digitec itself.

avatar
stueliueli

4 years ago

Does this motherboard need all three power connectors (24 pin, 8 pin as well as 4 pin CPU)? If so, am I correct in assuming that this power supply ( https://www.digitec.ch/de/s1/product/asus-rog-thor-850p-850w-pc-netzteil-9966913 ) does not have enough connections for this?

avatar
gschwinds

4 years ago

Manual page 44/2-8 Chapter 2.1.5 https://dlcdnets.asus.com/pub/ASUS/mb/SocketAM4/ROG_STRIX_X570-F_GAMING/G15827_ROG_STRIX_X570-F_GAMING_UM_v2_WEB.pdf The EATX12V_2 connection is optional. It is only needed if the CPU really needs a lot of power. E.g. extreme overclocking. The 24pin (EATXPWR) and the 8pin (EATX12V_1) are usually sufficient.

avatar
Atomic 207

4 years ago

Does this board support 4*16GB RAM?

avatar
Brimstone

4 years ago

Helpful answer

Yes. A maximum of 128GB (4x 32GB) is supported. See also product page -> Specifications -> ↓ Show more -> Working memory -> Max. Memory

avatar
Anonymous

5 years ago

Boot problems new BIOS 1407 Dear Community, since the update to the new BIOS 1407 from April of this year, I have been having boot problems in parts. The computer no longer boots up, the data from the hard disk is not loaded. If I then reset the computer, it works. When the computer is running, it is stable and without restrictions. Have you observed anything similar? Thanks for tips and greetings

avatar
Anonymous

5 years ago

Helpful answer

To understand the whole thing correctly: The PC posts, i.e. the boot screen appears, but the hard disk for Linux/Windows is not recognised? Where and how is the hard disk connected? If this is the case, I would go into the BIOS and see if the boot drives are recognised and listed in the correct order. Then there are the questions: Why did you carry out a BIOS update? All manufacturers actually advise against updating, as long as everything works as desired. I understand the urge to keep everything up to date (I have done this myself), but the BIOS is a pretty critical component. And have you already tried to flash the BIOS a second time or to install an older version?

30 of 36 questions

To Top