CHF34.–
Arctic Z2
Table, 34", 10 kg
Questions about Arctic Z2
What would you like to know?
0 questions and answers
Yes, this is possible, but it depends on the installed monitor size. If you go to the maximum size, the range of movement is limited.
Yes, this is possible without any problems. You can rotate the mount (with the monitor), so you can switch relatively quickly between horizontal and vertical alignment!
Helpful answer
Yes, I have attached two Dell U2719Ds to it myself. But it's not a wall mount, it's a table mount. It cannot be mounted on the wall.
Helpful answer
Yes, that is quite possible. I also use this combination. Two 27" is also possible, but then you can no longer adjust the angle well.
Hello!
Yes, you can! That's what I did as a temporary solution. And when the monitor is suspended, you don't see that a second arm belongs to it.
Hello, unfortunately this will not work. According to my measurement, a maximum of 6 cm is permissible. Kind regards
From the pictures, it seems to be the 3rd gen.
Yes, this mount is for monitors up to 34 inches and these are only 28.
Hello, with the stand there is a USB3 cable to connect it to the PC and a power cable if needed.
Helpful answer
The maximum weight is 16kg (as indicated on the packaging). You can attach a monitor weighing a maximum of 8kg to each arm.
https://www.arctic.ac/ch_de/z2-basic.html
Helpful answer
Hello Vaelu041
I use this holder with two 27" on an Ikea Linnmon plate. It has lasted me for a year :)
Helpful answer
This works, but the rotation of 2x 28" displays is slightly restricted if you have them very close to each other. But with distance it still works!
digitec
2 months ago
The Gigabyte M28U monitor is 28 inches in size, while the monitor mount is designed for a maximum of 25 inch monitors. The monitor is therefore not compatible as it exceeds the maximum monitor size of 25". In addition, the mount is designed for VESA 75x75 mm or 100x100 mm; the M28U generally supports VESA 100x100 mm, which fits, but the size restriction remains the deciding factor. The maximum payload of 16 kg is no problem for the M28U at around 6-7 kg.
Automatically generated from the .digitec
2 months ago
Helpful answer
The monitor mount is designed for two monitors up to a maximum of 25 inches. Monitors with 28 inches are not recommended, as the mount only supports monitors up to 25 inches and the maximum payload is 16 kg. The mount is also designed for VESA 75 x 75 mm and 100 x 100 mm.
Automatically generated from the .
Helpful answer
Yes that works, I have now simply unscrewed the 2nd arm. I now have a 49" screen on one side, not ideal but it works.
Helpful answer
The table is a Lista LO Extend Manus, just seen...
Helpful answer
Then with LG if they have the support vesa yes because as it is indicated it should read the support is accounting with screen 34" max. Double support therefore two 34" screens. Best regards
Unfortunately, the information on our site is incorrect, the product is actually suitable for a screen size of 25". We apologise for any inconvenience caused. You are welcome to contact our customer service if you would like to return the product and need support or help.
https://helpcenter.galaxus.ch/hc/de/requests/new
Helpful answer
Hello, I have smaller screens on it, but I have screwed the arm to the desk. If the desk top is stable enough, it can't tip over.
Helpful answer
From the table top to the top is a good 40 cm
Helpful answer
I measured approx. 41 cm from the tabletop to the top.
Yes it is possible
Yes, but it is a very tight fit. You might not be able to have them flat, might have to tilt in a bit.
Hi, I don't know if it fits Asus, but I have a 34 inch Samsung and a 24 inch HP mounted and it works.
Helpful answer
I must correct myself! It does have 4 USB ports...but still just 2 27 inch screens go next to each other...have now ordered another holder and will then weld the tube onto it, as there is no thread here (bought second-hand, but was unfortunately mistakenly a different version than this in the article).
30 of 134 questions