Questions about Arctic W1C

Are exactly 47cm

Yes it pulls straight out I find this monitor holder perfect you can do anything with this thing

To find out whether you can mount a Verbatim PM-14 monitor on this stand, you need to check two main things: the size and weight of the monitor, and the VESA dimensions. 1. Monitor size and weight: The stand can accommodate monitors up to 49 inches and weighing up to 18 kg. If your Verbatim PM-14 monitor is smaller and lighter, this should not be a problem. 2. VESA dimensions: The stand is compatible with 100 x 100 mm and 75 x 75 mm VESA mounts. You should check if your Verbatim PM-14 monitor uses one of these VESA mounts. If these conditions are met, the monitor should be compatible with the mount. If not, you should check other options.

Yes, the screws for mounting the monitor are included in the scope of delivery. The supplied tools and the necessary screws allow the monitor to be mounted quickly and securely on the wall bracket.

Ca. 8cm

Hello, I have a 49 inch monitor on it, but I don't move it. When mounting it, I tightened the hexagon head screw relatively well, mounted the monitor and positioned it (front/rear and left/right tilt). I then removed the monitor again and tightened the hexagon head screw as much as I could. It has now held for about a year

Yes you can, Vesa 100x100 both on the screen and on the mount

Mine is mounted and difficult to precisely mesure the distances and sizes, so it’s an aproximation. Center holes are about 14cm appart (top to bottom). Side holes about 23cm appart (top to bottom). Center holes are around 8mm wide. Side holes quite small, but not made to support weight I guess, more for stability. The monitor compatibility can be found here: https://support.arctic.de/w1c/compatibility I have a 27inch monitor on it, works fine. Hope it helps.

I used it with a philips 49". It can easily keep up with a measly 32" :D

If your monitor has the corresponding VESA mount dimensions and also otherwise... rather YES (be careful, no one but you knows your AOC monitor).

The monitor has a mounting plate at the back that is connected to the stand and attached to the minitor with 4 screws. Measure this plate and compare it with the dimensions of the wall bracket. Unscrew the plate and attach the wall bracket using exactly the same screw holes!

I have a Samsung Odyssey G5 27 inch monitor curved and it works I think it will have to work for you too.