Primochill Acrylic tube 13/10mm

With the Rigid Acrylic Tubes, the Americans are presenting a very interesting solution for water cooling enthusiasts who are not entirely without talent, in which large parts of the tubing can be produced in one piece without the use of many connections, elbows, tees and other adapters.

For this purpose, a red-orange transparent tube made of acrylic is supplied, which shines under an ultraviolet light source, is 90 cm long and has an outer diameter of 13 mm and an inner diameter of about 10 mm. The fixed tube can now be cut to the required length by the user himself and can also be bent to fit with the help of a heat source.

For example, if you use a hot air gun and heat the Rigid Acrylic Tube for several minutes, the material becomes so soft that you can easily bend it to the desired radius and hold it until the acrylic has cooled down and the now bent tube hardens.

It couldn't be more individual! Here, everything you need can be created by yourself and can even be adapted later. Ideally, in addition to a hot air gun and gloves, you will have a silicone rod (or something similarly flexible but heat-resistant) at hand, which you insert into the tube in advance so that the tube, which has softened, does not get a kink when bending.

Clues: PrimoChills Rigid Acrylic Tube has been designed to work smoothly with a large number of different cooling components. However, care should be taken to ensure that under no circumstances should alcohol, ethylene glycol or other hazardous chemicals be used.