PiL THEOS/THEOS-LUM+MAXI

LED street light series available in two versions: Die-cast aluminium housing painted with grainy grey polymer powder coating after prior chemical surface treatment. Locking ring made of painted die-cast aluminium with polyester powder coating, captively connected to the housing by a joint. Fixing part for poles made of die-cast aluminium, grainy painted, suitable for poles with a diameter of 60 to 76 mm. Optics made of technopolymer lenses with increased light transmission. Secure light distribution system guarantees uniform light distribution even in the event of an LED malfunction. Highly elastic, wear-resistant silicone seal. Diffuser made of extra-clear, tempered safety flat glass. Terminal strip ensures automatic interruption of the power supply when the luminaire housing is opened. Luminaire includes a converter and an additional protective device against mains overvoltages up to 10 kV. External screws made of stainless steel. Supplied with 1 metre cable H07RN-F 2x1.5 mm² or H07RN-F 4x1.5 mm² for dimmable versions, allowing mains connection without opening the luminaire body. Depending on the model, the following optics are available: SR/075 for narrow roads with a B/H ratio (road width/mast height) of up to 0.75, SR/100 for two-lane roads with a B/H ratio of 1, SR/125 for wide roads with a B/H ratio of 1.25, and SR/150 for wide roads with a B/H ratio equal to 1.5. Complies with light pollution standards. NEMA versions are equipped with a NEMA socket connected to the DALI converter, intended for the installation of smart compatible solutions. Versions available with a 7-pin NEMA connector for connection to external remote control systems. CLO (Constant Light Output) option available.