Oracover Orastick cadmium yellow 2 meter roll

ORASTICK® is the ironable and blow-dryable adhesive film. In terms of properties, ORACOVER® and ORASTICK® are identical and can be processed interchangeably. However, the fundamental difference between the two products lies in the adhesive layer. While ORACOVER® is equipped with a heat-activated adhesive, ORASTICK® features a self-adhesive bonding agent. The standard color range of ORASTICK® includes 27 colors that have been popular for years.

Recommended accessory: ORASTICK® Adhesive AN-68118. Unstable wood fibers can become unstable and tear under stress. Wrinkling and, in the worst case, complete detachment of the fabric are the consequences.

Our tip: For optimal pre-treatment of your wooden surface, we recommend applying the ORASTICK® adhesive to the areas to be ironed. The ORASTICK® adhesive penetrates the wood and bonds the loose wood fibers in the core wood. This achieves excellent 3-D bonding of the ORASTICK® film with the substrate. With the ORASTICK® adhesive, no further pre-treatment of the wood is necessary.

Application of the ORASTICK® adhesive:
1. Sand your wood thoroughly and remove sanding dust.
2. Stir the contents of the can well.
3. Apply the ORASTICK® adhesive thinly and evenly 1-2 times using a brush.
4. Allow the adhesive to dry overnight, but for at least 10 hours. (Please do not sand again)
5. Cover or stick your model as usual with the ORASTICK® adhesive film.

Coverage: approximately 1 can / 1 m². Not suitable for substrates that are not resistant to organic solvents.

ORASTICK® Special Thinner AN-83345: If our adhesives in opened cans dry out a bit, the adhesive can be adjusted back to brush viscosity with the corresponding thinner.