Metz Connect Potential isolator PT C12 24VAC/DC

Metz Connect Interface Module PT-C12 24VAC/DC

Manufacturer: Metz Connect
Designation: Interface Module
Type: PT-C12 24VAC/DC
Connection Type Primary Side: Other
Connection Type Secondary Side: Other
Bidirectional: No
Overcurrent Protection: Yes
Galvanic Isolation: Passive

The potential separator/signal converter is used to separate analog signals in the range of 0 to 10 V DC and 0 to 20 mA DC or to convert signals from 0 to 10 V DC to 0 to 20 mA DC or from 0 to 20 mA DC to 0 to 10 V DC. The input and output signals, as well as the supply voltage, are mutually isolated. An input signal of either 0 to 10 V or 0 to 20 mA can be connected to the device.

Function of Potential Separation: In the PT-C12, the input signal of 0 to 10 V is proportionally matched to the output signal of 0 to 10 V. The PT-C12 matches the input signal of 0 to 20 mA proportionally to the output signal of 0 to 20 mA.

Function of Signal Conversion with Potential Separation: During signal conversion from 0 to 10 V to 0 to 20 mA or from 0 to 20 mA to 0 to 10 V, the converted output signal can be adjusted using an integrated spindle trimmer. Additionally, a manual emergency operation level with a HAND-AUTO switch and feedback contact is integrated. Using the front-side potentiometer, the output signal can be set to 0 to 10 V or 0 to 20 mA in the HAND switch position. A constant output voltage of up to 10 V DC, 5 mA is available at the terminal 10 V. The input Y is used for the LED display of the output voltage Ua. The brightness of the LED depends on the level of the output signal. Alternatively, an external signal can be connected to input Y for LED display from 0 to 10 V DC.

Connection with screw terminals.