Jumo Conductivity sensor

Jumo conductivity sensor 00562982 Manufacturer :Jumo Designation :Conductivity sensor 0.05-10uS/cm,0.1-20M Type :00562982 Version :conductive Insertion length :40 mm Max. pressure :16 bar Max. pressure :16 bar Pressure :16 bar Max. Temperature :135 °C Sensor type :Pt1000 Cell constant :0.01 Electrode material :Stainless steel 316 (1.4435) Process connection design :Screw connection PG 13.5 Process connection material :Stainless steel 316 (1.4435) Electrical connection version :Round plug Angled plug :no Cable length :0 m Jumo conductivity sensor 00562982: more details This conductive conductivity sensor has a cell constant of K=0.01 (for measuring ranges 0.05 to 10 uS/cm or 0.1 to 20 MOhm/cm) and a Pt1000 measuring insert in a two-wire circuit. It is installed using the PEKA process connection adapter made of stainless steel (1.4435) with EHEDG certification. An M12 plug is available for the electrical connection. The electrode material is stainless steel (1.4435). The installation length is 40 mm. The operating temperature is 0 to +135 °C in normal operation and up to +150 °C for max. 45 min. during sterilisation. The maximum pressure load is 9 bar at 25 °C and 15 bar at 150 °C (max. 45 min.). This version is a so-called pharmaceutical version with acceptance test certificate acc. EN 10204 3.1 for material and roughness, roughness of parts in contact with the medium less than 0.8 my, with ASTM certificate and shrink-wrapped in film. ATTENTION: These measuring cells can only be used with an optional PEKA adapter. EAN: 4053877005933.