Hacker a50-12l turnado v4 kv450 long wellle

The new Turnado V3 Glider seamlessly integrates into our program for glider nose drives/FES. Thanks to the shaft extension with the built-in support bearing, this drive can also be installed in slim glider noses. The easily adjustable shaft can be modified by loosening the three M3 screws on the back. The model can be converted back to a glider in no time. E-flight and glider towing are possible alternately.

The drive is based on the proven Hacker A50-Turnado with a free shaft and a diameter of 6 mm, suitable for use with common prop adapters and scale spinners.

Application area for glider nose drive/FES:

• Perfect as a nose drive for takeoff on its own landing gear with a small propeller.
• For gliders up to approximately 12 kg: 6S LiPo, RFM 13x10, Master Mezon 120 lite (current draw approximately 60-65A in flight).
• For gliders up to approximately 16 kg: 6S LiPo, RFM 14x10, Master Mezon 120 lite (current draw approximately 70-75A in flight).

Technical specifications of the motor:

• No-load current at 8.4V: 1.2A
• Internal resistance: 0.019 Ohm
• No-load RPM per Volt: 450 RPM
• Weight: 445 g
• Outer diameter: 51.5 mm
• Length: 61 mm
• Number of poles: 10
• Recommended ESC: 80A-130A
• Recommended brushless timing: 15°-20°
• Shaft diameter: 6 mm (internal 8 mm)
• Mounting thread: M4, 25 / 30 mm

Note: The A50 Turnado motor does not come with a prop adapter. Since this drive is used for glider models with folding propellers, various folding propeller adapters suitable for the model are used. You can find these under the "general accessories" tab in many variations.