Product details
Test adapter for electric charging points (1-/3-phase, Type 2) for Profitest with protective contact socket (Type F). The 1- and 3-phase test adapter with Type 2 plug is used to test the effectiveness of protective measures at electric charging points with the Profitest Master. It allows for the simulation of fictitiously connected electric vehicles as well as the simulation of current carrying capacity according to IEC 61851-1. The extended CP test pin is also suitable for testing charging points with permanently mounted charging cables.
Vehicle simulation (CP): Vehicle states A to E are set via a rotary switch.
Cable simulation (PP): The various codings for charging cables with 13, 20, 32, and 63 A, as well as "no cable connected," can also be simulated using the rotary switch.
Error simulation: A short circuit between CP and PE can be simulated via the rotary switch. The phase voltages are displayed via LEDs; depending on the electric charging station, one or three phases may be active.
For vehicle simulation (CP): According to IEC 61851, states A, B, C, and E can be simulated. The different vehicle states are set using the rotary switch:
- State A: no vehicle connected
- State B: vehicle connected but not ready to charge
- State C: vehicle connected and ready to charge, ventilation of the charging area not required
- State E: Error: short circuit CP-PE via internal diode
For cable simulation (PP): The various codings for charging cables with 13, 20, 32, and 63 A can be simulated. It is also possible to simulate the state "no cable." The simulation of the various charging cables is done by switching different resistances between PP and PE using the rotary switch. According to IEC 61851, the following values are possible:
- 13 A cable - 1.5 kΩ
- 20 A cable - 680 Ω
- 32 A cable - 220 Ω
- 63 A cable - 100 Ω
Additionally with protective contact socket (Type F). 1 test adapter METRALINE PRO-TYP EM II and 1 operating manual.
Item number | 15062107 |
Manufacturer | Gossen |
Category | Metrology |
Manufacturer no. | Z525G |
Release date | 12.3.2021 |
External links |
Colour | Black |
Type of measuring technique | Adapter |
Max. input voltage | 400 V |
Temperature range | 10° - 45° C |
Calibrated according to | Factory standard (without certificate) |
Manufacturer Type | Z525G METRALINE PRO-TYPE EM II |
Country of origin | China |
CO₂-Emission | |
Climate contribution |
Scope of delivery | 1x operating instructions, 1x PRO-TYP EM II test adapter |
Length | 210 mm |
Width | 105 mm |
Height | 53 mm |
Weight | 795 g |
Length | 40.90 cm |
Width | 30 cm |
Height | 11.20 cm |
Weight | 1.21 kg |
Compare products
Goes with
Reviews & Ratings
Warranty score
How often does a product of this brand in the «Metrology» category have a defect within the first 24 months?
Source: Digitec Galaxus- GossenNot enough data
- 1.Erickhill0 %
- 1.Fluke0 %
- 1.Hirschmann Test & Measurement0 %
- 1.Max Hauri0 %
Warranty case duration
How many working days on average does it take to process a warranty claim from when it arrives at the service centre until it’s back with the customer?
Source: Digitec Galaxus- GossenNot enough data
- BaselineNot enough data
- ErickhillNot enough data
- FlukeNot enough data
- Hirschmann Test & MeasurementNot enough data
Unfortunately, we don't have enough data for this category yet.
Return rate
How often is a product of this brand in the «Metrology» category returned?
Source: Digitec Galaxus- GossenNot enough data
- 1.Hirschmann Test & Measurement0 %
- 1.Max Hauri0 %
- 1.RND0 %
- 4.Renkforce0.2 %