Eltako Switching relay 1 NO contact potential free 16A/250V AC

No standby loss. State-of-the-art hybrid technology combines the advantages of wear-free electronic control with the high performance of special relays. Simply connect the neutral conductor to the terminal (N) and the live conductor to 1 (L). This results in a standby consumption of only 0.1 watts. If the contact is used to control switching devices that do not switch at zero crossing, (N) should not be connected, as the additional closing delay would have the opposite effect. Very low switching noise. Control indicator with LED. The terminal connection layout is identical to the electromechanical relay R12-100. By using a bistable relay, there is no coil loss power and no heating even when switched on. The relay contact can be open or closed during commissioning and will synchronize on the first actuation. This relay is not suitable for feedback with the switching voltage of a dimmer switch. The electronics do not have their own power supply and therefore have no standby loss. Only when the control contact is closed is the microcontroller activated, which switches the bistable relay in the correct direction. When the control contact is opened or the control voltage drops, it switches back.