Eltako Switch current impulse switching relay noiseless

Silent solid-state relay, not potential-free, 400 watts, with fall-back delay, switch-off pre-warning, and optional push-button permanent light. Encrypted radio, bidirectional radio, and repeater function can be activated. Standby loss is only 0.8 watts. Suitable for installation. The dimensions are 45 mm long, 45 mm wide, and 33 mm deep. Starting from production week 35/16, an automatic electronic over-temperature shutdown is integrated. For loads of less than 1 watt, a GLE must be connected in parallel with the load. In addition to the radio control input via an internal antenna, this radio actuator can also be locally controlled with a conventional 230V control button that may be mounted in front of it. A glow lamp current is not permitted. Encrypted sensors can be learned. Bidirectional radio and/or a repeater function can be activated. Every state change and received central control telegrams are confirmed with a radio telegram. This radio telegram can be learned into other actuators, the GFVS software, and universal displays.

Scene control: With one of the four control signals from a button learned as a scene button with a double rocker, multiple FSR61 devices can be switched on or off as a scene. With the upper rotary switch in the LRN position, up to 35 radio buttons can be assigned, including one or more central control buttons. Additionally, radio window-door contacts with the function of a normally closed or normally open contact when the window is open, radio outdoor brightness sensors, and radio motion detectors can be used. The LED accompanies the learning process according to the operating instructions and indicates radio control commands during operation with a brief flash.