Eltako Radio control unit FSG71/1-10V for electronic ballast 1-10V

Dimming switch control unit for EVG 1-10V, 1 normally open relay not potential-free 600VA and 1-10V control output 40mA. Minimum brightness and dimming speed adjustable. Features children's room, snooze, and light alarm functions, as well as constant light control and master-slave operation. Additionally equipped with light scene control via PC or wireless switches. Encrypted radio, bidirectional radio, and repeater function can be activated. Standby loss is only 1.4 watts. Installation in the 230V mains connection line, for example in false ceilings and luminaires. Dimensions: 166 mm long, 46 mm wide, and 31 mm deep. Includes cable strain relief. Switching occurs at zero crossing to protect the contacts. Also suitable for controlling LED converters with a passive 1-10V interface without auxiliary voltage up to 0.6 mA; above that with auxiliary voltage. The set brightness level is stored when switched off (memory). In the event of a power failure, the switching state and brightness level are saved and can be restored when the supply voltage returns. The %Lamp rotary switch allows setting the minimum brightness (fully dimmed). The dim-speed rotary switch adjusts the dimming speed. The switching on and off of the load is done with a bistable relay at the EVG output. Switching capacity for fluorescent lamps or low-voltage halogen lamps with EVG 600VA. The use of a bistable relay ensures that there is no coil loss and no heating even when switched on. After installation, wait for the automatic short synchronization before connecting the switched load to the mains. The buttons can be programmed either as directional buttons or as universal buttons. Features children's room function and snooze function. Light alarm function: A corresponding learned radio signal from a timer activates the wake-up function by turning on the lighting at the lowest brightness and gradually dimming to maximum brightness.