Eltako Radio actuator

Funkaktor multifunction time relay 230V. 1 potential-free normally open contact 10A/250V AC, incandescent lamps 2000 watts. Encrypted radio, bidirectional radio, and repeater function can be activated. Standby loss is only 0.8 watts. Designed for installation. 45 mm long, 45 mm wide, 33 mm deep. Supply and control voltage locally 230V. In the event of a power failure, the switching state is maintained. Upon restoration of power, it is defined as switched off. This Funkaktor features the latest hybrid technology developed by us: the wear-free receiving and evaluation electronics are combined with a bistable relay. This means there is no coil loss and no heating even when switched on. After installation, wait for the automatic short synchronization before connecting the switched load to the power supply. In addition to the radio control input via an internal antenna, this Funkaktor can also be controlled locally with a conventional control button that may be mounted beforehand. A glow lamp current is not permitted. Starting from manufacturing week 11/14, encrypted sensors can be learned. Bidirectional radio and/or a repeater function can be activated. Every state change and received central control telegrams are confirmed with a radio telegram. This radio telegram can be learned into other actuators, the GFVS software, and universal displays. With the upper rotary switch in the LRN position, up to 35 radio buttons can be assigned, including one or more central control buttons. Additionally, radio window and door contacts (FTK) can be used with the function of normally open or normally closed when the window is open. If a direction button is learned, the upper button (START) can start a function (e.g., TI) and the lower button (STOP) can stop it. After that, the desired function of this Funkaktor can be selected.