Eltako FT55-al Wireless pushbutton aluminum painted with rocker and double rocker

Radio button, 80x80mm outside, frame inner dimension 55x55mm, 15mm high. Generates energy for radio telegrams even when the button is pressed, therefore no connection cable and no standby loss. With single rocker and double rocker. Smart Home sensor. The delivery includes the frame R, a rocker W55, a double rocker DW55 (all in the same color), a mounting frame BRF, the mounting plate HP, the radio module, and an adhesive film. A radio button with a single rocker can send two evaluable signals, while a radio button with a double rocker can send four. The mounting plate can be screwed onto a flat surface or glued to the wall, glass, or furniture using the included adhesive film. Above a 55mm switch box, the existing sleeves in the box are used for screw fastening. The double rocker is factory-mounted on the radio module. If it needs to be replaced with the large rocker, pull the rocker halves forward without bending them towards the center. Then snap the large rocker into place so that its markings 0 and I on the back align with the radio module. When gluing, first attach the mounting plate set with the frame and mounting frame - with the latches at the top and bottom - to the surface. Then snap the radio module set with the rocker - marking 0 on the back always facing up - into place.