Eltako FSR61/8-24V UC Wireless actuator, flush-mounted 1 NO contact 10A/250V AC

EltaKo Funkaktor pulse relay. 1 potential-free normally open contact, 10A/250V AC, incandescent lamps up to 2000 watts, with delay off and pre-warning for disconnection, as well as a switchable permanent light feature. Encrypted radio, bidirectional radio, and repeater function can be activated. Standby loss is only 0.3-0.8 watts. Designed for installation. Dimensions: 45 mm long, 45 mm wide, 33 mm deep. The switching state is maintained in case of power failure. Upon restoration of power, it will turn off as defined. After installation, wait for the automatic short synchronization before connecting the switched load to the network. In addition to the radio control input via an internal antenna, this actuator can also be locally controlled with a conventional push button that may be installed beforehand. A glow lamp current is not permitted. Encrypted sensors can be learned. Bidirectional radio and/or a repeater function can be activated. Any change in state, as well as received central control telegrams, will then be confirmed with a radio telegram. This radio telegram can be integrated into other actuators.