Eltako FSB61NP-230V Shutter/blind trigger smart home actuator

Funkaktor 230V. 1+1 normally open relay, not potential-free, 4A/250V AC, for roller shutters and shading elements. Encrypted radio, bidirectional radio, and repeater function can be activated. Standby loss is only 0.9 watts. Designed for installation. Dimensions: 45 mm long, 45 mm wide, 33 mm deep. Supply, switching, and control voltage locally 230V. In the event of a power failure, it will be turned off as defined. In addition to the radio control input via an internal antenna, this actuator can also be controlled locally with a conventional 230V control button that may be mounted in front of it. Starting from manufacturing week 36/19, a direction button for down can be connected via the diode RTD (polarity does not matter). Another direction button for up is connected directly to the control input. Upon the first control impulse for down, the FSB61 switches the control input to direction button mode. To switch the control input back to universal button mode, the supply voltage must be briefly turned off. Encrypted sensors can be learned. Bidirectional radio and/or a repeater function can be activated. Any change in state as well as received central control telegrams will then be confirmed with a radio telegram. This radio telegram can be learned into other actuators, the GFVS software, and universal displays. With the upper rotary switch set to LRN, up to 35 radio buttons can be assigned, including one or more central control buttons. After that, the desired function of this pulse group switch is selected: GS1 = group switch with button control and fallback delay in seconds. A radio button with the function Up-Hold-Down-Hold can be learned as a universal button, as well as a radio button as a direction button. A pulse at the top will specifically activate the switching position Up. A pulse at the bottom will specifically activate the switching position Down.