Eltako Blisterpack Dimmen BPD55-D62

Blister pack dimming with wireless switch F2T55E-wg and wireless universal dimmer FD62NPN-230V. Smart Home sensor and Smart Home actuator. F2T55E-wg: Wireless 2-channel switch in E-design 55, 80x80mm exterior dimensions, frame interior dimensions 55x55mm, 15mm high. Generates energy for wireless telegrams even when the button is pressed, thus no connection wire and no standby loss. With rocker switch. Smart Home sensor. A wireless switch with a rocker can send two evaluable signals: press the top of the rocker and press the bottom of the rocker. The mounting plate can be screwed onto a flat surface or attached to the wall, glass, or furniture using the included adhesive film. Above a 55mm switch box, the existing sleeves in the box are used for screw fastening. FD62NPN-230V: Wireless universal dimmer. With power MOSFET. Dimmable 230V LED lamps in phase-cut mode up to 300W, or in phase-angle mode up to 100W, depending on ventilation conditions. 230V incandescent and halogen lamps up to 300W, depending on ventilation conditions. No inductive (wound) transformers. With children's room and snooze function. No minimum load. Standby loss only 0.5 watts. For flush mounting. 49x51mm, 20mm deep. The connection terminals are plug terminals for conductor cross-sections from 0.2mm² to 2.5mm². With the convenient tap technology, up to 32 wireless universal switches, wireless directional switches, wireless central control switches, and motion sensors can be learned. Bidirectional wireless activation possible. Switching at zero crossing with soft on and soft off for lamp protection. Supply, switching, and control voltage locally 230V. The set brightness level is stored when switched off (memory). In the event of a power failure, it is defined to switch off. Automatic electronic overload protection and over-temperature shutdown.