DFRobot Gravity MOSFET Driver Module 10A

With the Gravity MOSFET Driver Module, you can switch large currents of up to 20A with your microcontroller or Raspberry Pi. You can control the module like a relay, but also with PWM. The module supports a logic level for activation from 3.3V to 10V, making it universally applicable. The VIN connection supports 5 to 36V DC and 0 to 20A input current. If the current exceeds 10A, we recommend installing an external heat sink. The MOSFET can be used at a switching frequency of up to 1KHz.

Info: The MOSFET power controller features a PH2.0-3P Gravity connector. You can reverse the included connection cable by plugging in a Dupont M-M 10cm cable to use it with an Arduino UNO as well.

Technical details:

• VIN operating voltage: 5V-36V DC
• VIN operating current: 0A-20A (an external heat sink is recommended for currents over 10A)
• Logic level voltage: 3.3 to 10V DC
• Switching frequency: 0-1KHz
• Switching behavior: T(on)=20us/T(off)=50us
• Operating temperature: -55°C to 155°C
• Interface type: PH2.0-3P
• Dimensions: 44 x 32 x 15mm
• Weight: 21g

Delivery includes:
1x Gravity MOSFET Driver Module 10A
1x Gravity 3-pin digital sensor cable PH2.0 to XH2.54.