DFRobot 6kg 180° servo with slipping clutch

In servos, if the mechanical load exceeds the specifications, it can lead to damage to the gearbox or overheating. With these special clutch servos featuring a clutch function and electronic protection, overload or damage can no longer occur. If the angle of a servo is altered by external forces during normal operation, the servo can automatically reset and continue to operate through the clutch function, preventing damage. The additional electronic protection shuts off the blocked servo after 5 seconds to avoid overheating. This servo has a high torque, stable performance, precise running angle, and is easy to install. When operated at 6V, it achieves a stall torque of 6Kg. There is no limited stop inside the servo, allowing it to rotate smoothly in 360 degrees (manual only). You can control the servo using the servo libraries from your Arduino IDE and operate it with a maximum 180-degree rotation within the pulse range of 500-2500μsec.

Technical Details:
Operating Voltage: 4.8 to 6V DC
Type: DS-R001
Communication: PWM
Operating Angle: 180°±10°
Pulse Width Range: 500 to 2500μs
Static Current: ≤10mA at 6.0V
Idle Current: ≤60mA at 6.0V
Stall Current: ≤1.65A at 6.0V
Rated Torque: ≥4.4kg cm at 6.0V
Stall Torque: ≥6.0kg cm at 6.0V
Dimensions: 55.4 x 20 x 41.8mm
Weight: 51g

Included in Delivery:
1x 6Kg 180° Servo with Slip Clutch
1x Servo Arm Set.