Alantec Patch-cord S

Cables are intended for cross-connection at distribution points and subscriber connections. Cables in different colors are available on request.

Construction and electrical parameters:

• Category: 6 A Class EA (600 MHz)
• Cross-section: AWG 4x2 x 26/7 AWG Multi-conductor cable
• Insulation: Polyethylene
• Fire protection class: CPR (Euroclass) Eca
• Center: 4 twisted pairs, each pair wrapped with foil of polyester and mesh braiding
• Shield: Pairs shielded with polyester foil, covered with a layer of aluminum, under the shielding an earthing conductor of tinned copper wire with a diameter of min. 0.4 mm and mesh braiding
• Coating: Polyvinyl with increased oxygen index (FRPVC)
• PoE: 802.3 at type 2 (PoE+)
• Color: Red

Electrical properties at 20 °C:

• DC loop: ≤ 95 Ω/km
• Variable resistance: ≤ 2 %
• Insulation resistance (500 V): ≥ 500 MΩ
• Passive resistance capacitor at 800 Hz nominal: 48 nF/km
• Variable reactive capacitance: ≤ 1500 pF/km
• Nominal propagation speed (NVP): 69 %
• Delay propagation nominal: ≤ 535 ns/100 m
• Delay angle nominal: ≤ 20 ns/100 m
• DC min. installation tester (core): 1000 V

Mechanical characteristics:

• Bending radius: 4 x outer diameter
• Max. tensile force: 80 N
• Temperature range during use: -20 °C to +75 °C
• Temperature range during installation: 0 °C to +50 °C.