CHF116.–
Stadler Form Oskar
50 m²
Question about Stadler Form Oskar
I have just cleaned the Oskar for the second time and then felt it with water. The water level is below the mark. When I put the lid on the bottom part, the red LED goes off. When I lift the lid, the LED comes back on. This may have something to do with the two contact pins in the base. The unit cannot be operated. Does anyone have any advice?
According to your description, everything seems to be fine with your Oskar. Of course, the red LED comes on again when you lift the lid (lifting the lid = not ready for operation). So if there is enough water in it, the Oskar is ON and it still doesn't start running, it can only mean that the humidity in the room is already high enough. (50-55% is recommended as optimal. You can achieve this with level 4 (55%) in the hygrostat setting). At level 5 it runs in continuous operation. Respectively, it should now - Otherwise, the manufacturer's website may be helpful ;)
The appliance only runs with the lid on and at least a minimum water level. The red LED indicates that the water level is too low. As long as it is lit, the unit cannot be put into operation. If Oskar is filled and lights up red with the lid on, I would suspect a defect.