Question about Ruptor R6 V3

To adjust the rear spring on the Ruptor R6 V3 e-scooter, follow these general steps as specific instructions for this model are not available. Note that the exact steps may vary depending on the design:

1. access to the spring:
- Make sure the e-scooter is on a level surface and the brakes are applied.
- If necessary, remove the covers or mudguards to gain access to the spring.

2. identify the spring mechanism:
- Check to see if the spring has a screw, knob or other type of adjustment mechanism.

3. adjust the spring:
- Increase firmness: Turn the adjustment screw clockwise to tighten the spring. This can help to stabilise the rear wheel better, especially when riding fast or with heavy loads.
- Reduce firmness: Turn the adjustment screw anti-clockwise to soften the spring. This can be useful on uneven terrain or for lighter riders.

4. check the adjustment:
- Do some test rides to make sure the spring responds the way you want it to. Make sure that the spring is not too hard or too soft, as this can affect riding stability.

5. restore the covers:
- Once the adjustments have been made, replace any covers or mudguards that have been removed.

If you are unsure or need specific instructions, it is advisable to consult the manufacturer's operating instructions or ask Ruptor directly.