Question about Eversolo DMP-A6

There are several ways to connect the Eversolo DMP-A6 to active speakers such as the Audioengine a5+, depending on whether you want to use the DMP-A6's internal DAC functions or an external DAC.

### Using the DMP-A6's internal DAC functions

1. connection via RCA or XLR:
- Use the analogue output ports (RCA or XLR) on the back of the DMP-A6.
- Connect the RCA or XLR cables to the corresponding inputs of your Audioengine a5+ speakers.

### Using an external DAC

1. connection via USB to an external DAC:
- Use a USB A-B cable and plug it into the USB AUDIO port of the DMP-A6 and into the USB B port of the external DAC.
- Make sure that the external DAC is set to the USB-B input.
- Then connect the external DAC to the Audioengine a5+ speakers via RCA or XLR.

### Settings on the DMP-A6

- If you are using an external DAC, set the output to "USB DAC" in the DMP-A6 menu and adjust the settings according to the capabilities of the external DAC.

### Additional notes

- Make sure that the speakers are properly connected and switched on.
- Check the settings of the DMP-A6 and the external DAC to achieve the best possible audio quality.