Best selling Diodes
Here's a ranking of the best products in this category. To give you a quick overview, we've also added some key information about the products.
1. OEM LED assortment with 30 LEDs
The LED assortment with 30 LEDs offers a versatile selection of light-emitting diodes in various colors and sizes, ideal for a wide range of applications. This set includes 30 LEDs, divided into three colors: red, green, and yellow, as well as two different sizes of 3 mm and 5 mm. The LEDs are known for their high efficiency and durability, making them excellent for projects in electronics, model building, or decorative lighting. With a wavelength of 512 nm for green, 589 nm for yellow, and 634 nm for red, these LEDs provide a clear and vibrant light output. The operating voltage ranges from 2.0 to 3.4 volts, making them a flexible choice for various power sources. The LEDs are also equipped with a beam angle of 70 degrees, allowing for a wide light distribution.
- Versatile selection of 30 LEDs in three colors: red, green, and yellow
- Two size options: 3 mm and 5 mm for different applications
- High efficiency with a forward current of 20 mA
- Wide beam angle of 70 degrees for optimal light distribution
- Suitable for electronics projects, model building, and decorative lighting.
2. Osram LED control unit
OSRAM Betriebsgeräte LED control unit 1-10V OT DIM
Manufacturer: OSRAM Betriebsgeräte
Designation: LED control unit 1-10V
Type: OT DIM
Version: Dynamic
Suitable for outdoor use: No
Dimming 0-10 V: No
Dimming 1-10 V: Yes
Dimming DALI: No
Dimming DSI: No
Dimming DMX: No
Dimming potentiometer (device-integrated): No
Dimming GPRS: No
Dimming LineSwitch: No
Dimming manufacturer-specific: No
Dimming mains voltage modulation: No
Dimming phase section: No
Dimming phase angle: No
Dimming programmable: No
Dimming RF: No
Dimming Sine Wave Reduction: No
Dimming Touch and Dim: No
Dimming Zigbee: No
Dimming with Push-button: No
Without dimming function: No
Housing: Plastic housing
Suitable for constant current: No
Suitable for constant voltage: Yes
Output voltage: 10.5 to 24 V
Suitable for DC voltage (primary side): No
Output power: 120 W
Protection class (IP): IP20
Protection class: III
Length: 172 mm
Width: 42 mm
Height: 20 mm
Compatible with Apple HomeKit: No
Compatible with Google Assistant: No
Compatible with Amazon Alexa: No
IFTTT support available: Yes
OSRAM Operating Devices LED control unit 1-10V OT DIM: More details
Constant voltage dimmer with 110 V.
Product features: Intelligent analogue dimmer (110 V) with constant output voltage. Dimming range: 0 to 100%. Strain relief housing for independent mounting. Unit also suitable for special applications requiring dimming level below 1%.
Product advantages: Safety requirements due to overload, overtemperature, and short-circuit protection.
Areas of application: Suitable for SELV installations indoors.
EAN: 4050300943459.
3. Quadrios LED range coloured 20 mA, 30 mA 2 V, 3 V
This experimental and practical assortment of wired standard LEDs with a diameter of 5 mm in red, blue, green, yellow, and warm white is ideal for immediate use in semiconductor light experiments. The datasheet contains useful information about the assortment as well as important technical details regarding the included components. This ensures that the LEDs can be operated within their specified parameters, as the components are clearly defined. It is important to note that light-emitting diodes must always be operated with a current-limiting resistor or a constant current source. Delivery includes: blister box, 5 mm LEDs (20 pieces each) in the colors red (Iv 800 mcd, beam angle 35°), blue (Iv 2000 mcd, beam angle 35°), green (Iv 120 mcd, beam angle 35°), yellow (Iv 800 mcd, beam angle 35°), warm white (Iv 20,000 mcd, beam angle 30°).
4. Play-Zone IR LED and IR receiver (photodiode) Set
Remote control made easy. With this set consisting of an infrared LED (960nm) and a photodiode, you can remotely control your projects in the simplest way. The application is incredibly straightforward. Connect the photodiode (the black one) to the anode (+) with ground. Connect the photodiode to the cathode (-) with an input pin of your microprocessor. Add a pull-up resistor (e.g., 10k) between the cathode and VCC, or use the internal pull-up of the microprocessor. Connect the IR LED like a regular LED (e.g., with a 330-ohm resistor to 5V). The input pin of the microprocessor is set to high. Now, as soon as the photodiode receives a signal from the IR LED, the input pin switches to low. The range can reach up to 10 meters with a perfect setup and under ideal conditions. The LED voltage is 1.2V - 1.3V.
Diode
Quantity discount
CHF9.25 per piece for 4 units CHF9.25/1pcs.
Play-Zone IR LED and IR receiver (photodiode) Set
5. Rutec Licht LED power supply 24V 40W IP65 85479 dimmable phase control, 108x44x32mm
Rutec LED power supply 24V 40W IP65 85479 dimmable phase control, 108x44x32mm 1 (85479).
Diode
CHF56.90 CHF56.90/1pcs.
Rutec Licht LED power supply 24V 40W IP65 85479 dimmable phase control, 108x44x32mm
6. Velleman Arrow Panel Control Lamp 220v Red
Null.
7. Tru Components LED wired Pure white Round Clear 14400 mcd 30 ° 20 mA 2.7 V, 3.
The TRU COMPONENTS LED wired in pure white is a high-quality light-emitting diode that stands out for its high brightness and efficiency. With a luminous intensity of 14,400 mcd and a beam angle of 30°, this LED is ideal for a variety of applications, from lighting to decorative effects. The LED has a forward current of 20 mA and a forward voltage of 3.4 V, making it a reliable choice for projects that require a precise light source. With a housing diameter of 3 mm, it is compact and can be easily integrated into various designs. This LED is available in a convenient package of 100 pieces, making it a practical option for hobbyists and professionals who need a consistent light source.
- High luminous intensity of 14,400 mcd
- Beam angle of 30° for targeted lighting
- Forward current of 20 mA for efficient operation
- Available in a convenient package of 100 pieces.
Diode
CHF11.45 CHF0.12/1pcs.
Tru Components LED wired Pure white Round Clear 14400 mcd 30 ° 20 mA 2.7 V, 3.
8. Velleman 5mm Standard Led Lamp Green Diffused
5mm standard LED lamp green diffused.
9. Adafruit DC Stepper Motor
Make your robot dreams come true with the DC+Stepper Motor HAT from Adafruit. This Raspberry Pi add-on is perfect for any motion project, as it can control up to 4 DC motors or 2 stepper motors with full PWM speed control. Raspberry Pi and motors are not included. Since the Raspberry Pi has limited PWM pins, a dedicated PWM driver chip is used to control both the direction and speed of the motor. This chip handles all motor and speed controls via I2C.
10. SparkFun Arduino Pro Micro 5V/16Mhz
The SparkFun Pro Micro Board is similar to the SparkFun Pro Mini, except that it features an ATmega32U4 on board. The integrated USB transceiver allows the Pro Micro to be used as a keyboard, for example (like the Arduino Leonardo). This small board also includes all the other features we expect from Arduino: 4 ADC channels, 5 PWM pins, 12 digital I/Os, and a hardware serial connection. The board is powered by 5V and is clocked at 16MHz – just like the original Arduino. We offer only the latest revision without printing errors and with additional PTC fuses and protection diodes.
Product order
See all products